-18-
Press to switch the viewing angles.
(Note: This function only works with the discs encoded with multiple camera
angles.)
ANGLE
V-MODE
Press repeatedly to switch the video output modes between CVBS (OFF)
and YUV.
Press repeatedly to switch the audio output modes between 5.1
CHANNELS OUTPUT and STEREO OUTPUT.
A-MODE
ZOOM
Press this button to zoom in/ out the scene. The available zoom ratios are:
2X, 3X, 4X, 1/2 X, 1/3 X and 1/4 X. In zoomed-in mode, the direction keys
can be used to pan around the magnified picture.
Press repeatedly to switch to the available extra signal source USB or
SD/MS/MMC CARD, or return to the DVD mode.
USB
Insert a USB drive in the USB port, then press [USB] to play the readable files in it.
Press [USB] again to switch to the DVD mode.
Insert a SD, MS or a MMC card into the SD/MS/MMC card port, then press [USB] to
play readable files in it. Press [USB] again to switch to the DVD mode.
NOTE:
If a USB drive and a memory card are inserted at the same time, press [USB]
once to select USB and press twice to select memory card. Press for the third time to
return to the DVD mode.
This USB Port is designed to be used with most flash memory drives. Other USB drives
may not be supported.
USB DRIVE and SD/MS/MMC CARD PLAYBACK
Remote Control Function
Tuner Part
Press to switch between the AM mode and the FM mode.
AM/FM
Press to switch between Mono and Stereo
in FM mode.
reception of the broadcast
signal
MO/ST
After tuning in a new frequency, press [MEMORY], then select a preferred
station by inputting the corresponding numbers to save it as a preset station.
MEMORY
AUTO
Press to scan the broadcasting stations automatically.
The digit keys can be used to select a preset station.
For example, press[0] and [2] to go to channel 2; press [1] and [5] to go to the
channel 15.
1
4
7
2
5
8
0/10
3
6
9
10+
/-
LEFT/RIGHT
Press to fine tune (increase/decrease) the frequency.
Press the direction key [LEFT]/[RIGHT] to do manual scanning for
broadcasting station of lower/highter frequency.
RADIO+/-
Press to skip to the next/previous preset station.
NOTE:
In Tuner mode, [/-], [CH-LEVEL], [MUTE], [TONE] and [S.EFFECT]
buttons are available. For details, please refer to the remote control function of the DVD
part in this chapter.
The following buttons are used in Tuner Mode. Press [SOURCE SELECT] to select tuner
mode if it is in other mode.
During scanning broadcasting stations, press to stop the process.
