background image

FULL 90 DAYS LIMITE D WARRANTY

COBY ELECTRONICS CORP.

Customer Service Dept.

56-65 Rust Street

Maspeth, N.Y. 11378

COBY ELECTRONICS CORP. ( COBY) warrants this product to the original purchaser to
be free from defects in material or workmanship under normal use for 90 DAYS from the
date of original purchase. COBY agrees at our option under this warranty, to repair or
replace it with a new or reconditioned product at no additional charge. Our warranty , of
course, does not cover any product which has been subject to neglect, unreasonable use,
accident, violation of operating instructions, or any product that has been repaired or
modified by an unauthorized service agent
.

To obtain factory service, return this unit freight-prepaid to the address shown below
within the duration of this warranty. Enclose $6.00 for each item in the form of money order
made payable to COBY E LECTRONICS CORP. to cover the cost of postage and handling.
Also, include a copy of the sales receipt to show the proof of purchase and a detailed
description of the problem. The unit(s) must be packaged in such a way as to reasonably
protect it from possible shipping damage. For further information write to:

Coby's liability under any legal theory for any loss or damage in any way related to this
product shall in no event exceed the sales price of this product. In no event shall COBY be
liable for any incidental or consequential damages resulting from the use of, or inability to
use this product. Repair or replacement as provided under this warranty is the exclusive
remedy of the consumer.

Except to the extent prohibited by law, no express or implied warranty of merchantability
or fitness for a particular purpose on this product shall not extend beyond the period of this
warranty. Some states prohibit the exclusion or limitation of incidential or consequential
damages, so that the above limitations or exclusion may not apply to you. This warranty
gives you specific rights, and you may also have other rights which may vary from state to
state.

WARRANTY

Caller ID service may not work when the phone is connected to a Private Branch Exchange (PBX).
The caller has requested that their phone number be suppressed from Caller ID service, or caller

ID service is not available in their area.

or

will appear on the display.

You answered the call before Caller ID data was displayed, which usually occurs after the first ring.

Make sure you have subscribed to voice mail compatible with "FSK" type signaling (check with

your local phone company). Verify that both the On and Off signals are activated. If your voice
mail product from the local phone company does not support "FSK" signaling, you may use this
feature as a New Call Indicator only.

Check to be sure the phone is set to the correct type of service, either Tone or Pulse.

"Private"

"Unavailable"

New Call/Message Waiting Indicator doesn't work properly.

Can't receive or make phone calls.

Useful Feature and Terms

Calendar/Clock

-- Visual display of date and time.

Caller ID

-- Enables users to view name and number of callers. Contact your local telephone

company to subscribe to Caller ID Service.

Caller ID Log --

Stores up to 40 Caller ID entries.

Call Timer

-- Allows timing of phone conversations.

Dial from Display

-- One-button dialing from the Caller ID log.

Display

-- The Liquid Crystal Display (LCD) shows c lock and calendar, number dialed, low

battery indicator, Caller ID information and call timer.

Flash

-- A signal sent by the phone to the local telephone company supporting services such as

call waiting.

Message Waiting Indicator

-- A visual indicator that there are new messages in your voice mail

box. Requires FSK signaling by phone company. Contact your local telephone company to
subscribe to Voice Mail Service.

Mute

-- Prevents the party on the other end of the line from hearing local conversation while still

allowing that party to be heard.

New Calls Indicator

-- A visual indicator that new calls have been received.

Redial

-- Performs single button dialing of last number dialed.

Speed Dialing

-- Allows programming of frequently dialed numbers so that they can be dialed

with the two touch speed dial button. (20 entries)

Tone/Pulse Option

-- Enables you to switch from pulse (rotary) to tone dialing.

Volume Level Control

-- Permits volume adjustment of the handset and headset during a

conversation.

FSK type Signaling

-- A signal used to turn on and off the message waiting indicator, can be

sent by the telephone company with a ringing signal or without.

CARE MAINTENANCE AND TROUBLESHOOTING

GLOSSARY

28

27

Summary of Contents for CD-RA195
















Reviews: