Cobra XRS 9740, Operating Instructions Manual, Page: 7 / 21

Mode Tone Visual Setting Result
Pop Detect
mode Two beeps Pop Detect On Unit will detect Pop signals.
One beep Pop Detect Off Unit will not detect Pop signals.
VG-2 Detect
mode Two beeps VG-2 Detect On Unit will detect VG-2 signals.
One beep VG-2 Detect Off Unit will not detect VG-2 signals.
VG-2 Audio
mode (not
shown if VG-2
detect is off) Two beeps VG-2 Audio On With VG-2 Detect on, the unit will give
audible alerts for VG-2 signals.
One beep VG-2 Audio Off With VG-2 Detect off, the unit will give
only visual alerts for VG-2 signals.
Spectre 1
Detect mode Two beeps Spectre 1
Detect On Unit will detect Spectre 1 signals.
One beep Spectre 1
Detect Off Unit will not detect Spectre 1 signals.
Spectre 1
Audio mode
(not shown if
Spectre 1
detect is off) Two beeps Spectre 1 Audio
On With Spectre 1 Detect on, the unit will
give audible alerts for Spectre 1 signals.
One beep Spectre 1 Audio
Off With Spectre 1 Detect off, the unit will give
only visual alerts for Spectre 1 signals.
SmartPower
mode Two beeps SmartPower On SmartPower is on.
One beep SmartPower Off SmartPower is off.
X, K or Ku
Band detect
modes Two beeps X, K or Ku
Band On Unit will detect X, K or Ku
Band signals.
One beep X, K or Ku
Band Off Unit will not detect X, K or Ku
Band signals.
Set display
Dim mode
default* Two beeps Display Dim Partially dimmed for dusk or night driving.
One beep Display
Dimmer More dimmed for dusk or night driving.
One beep Display Dark Display is off.
Restore factory
settings One beep Restore Factory
Settings Resets user modes and settings to
factory default.
Exit program One beep EXIT PROGRAM Allows you to exit Program mode.
9
EasySet Programming
8
English
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Your Detector
* The settings for these user modes can also be changed with the one button method.
See description of each user mode (pages 10 and 24) for details.
This EasySet programming menu lists all of the modes and settings you can
choose from after you have entered Program mode as described on page 7.
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Your Detector
EasySet Programming
EasySet Programming Menu
Mode Tone Visual Setting Result
Set
IntelliShield
City mode
default* Two beeps City X A single beep sounds when the
signal is first detected.
One beep City X
beep Off Audio for all X band alerts are blocked
until signal strength reaches Level 3.
One beep City X+K Combines the City X mode with
prevention of K band audio alerts
until signal strength reaches Level 2.
IntelliMute
mode Two beeps IntelliMute On All alerts (except for strobe signals
from emergency vehicles) are
automatically muted below the
engine rev point you set.
One beep IntelliMute Off Normal operation.
Set IntelliMute
RPMs
(not shown
if IntelliMute
is off) One beep Set IntelliMute
(see page 14
to set activation
point) Allows you to set the engine
rev point while using IntelliMute.
AutoMute
mode Two beeps AutoMute On The audio volume of all alerts will be
automatically muted after four seconds for
as long as the signal is detected.
One beep AutoMute Off All alerts will sound at full volume
for as long as the signal is detected.
Voice/Tone
setting One beep
None
None
None
Changes from voice alert to tone alert.
Changes from tone alert to voice alert.
Set compass One beep Set Compass
(see page 17
to calibrate
compass) Allows you to calibrate the compass.