Detection
Your Detector
16 English
Strobe and Safety Alert Signals, Voice and Visual Displays
Type of Signal
Voice
Visual Display
3M Opticom or Tomar*
Emergency Vehicle Approaching
Emergency Vehicle
Emergency Vehicles
Emergency Vehicle Approaching
Emergency Vehicle
Road Hazards
Road Hazard Ahead
Road Hazard
Trains
Train Approaching
Train
* Your detector provides 360˚ detection of this signal.
VG-2 Alert Signal, Voice and Visual Display
Type of Signal
Voice
Visual Display
Interceptor VG-2
VG-2 Alert
VG2
NOTE
There are different tones for each Safety Alert.
NOTE
There are different tones for each alert.
NOTE
There are different tones for each alert.
Emergency Alert
Signal Detected
VG-2 Alert Signal
Detected
VG2
Spectre 1 Alert Signal, Voice and Visual Display
Type of Signal
Voice
Visual Display
Spectre
Spectre Alert
Spectre1
Spectre 1 Alert Signal
Detected
Spectre1
Road Hazard Alert
Signal Detected
Road
Hazard
Train Alert Signal
Detected
Train
Emergency...
Strobe Alert Display
(Flashing)
Emergency...
Settings
Your Detector
Nothing
Comes Close to a Cobra
®
9
IntelliMute
IntelliMute
is a unique new feature that allows you to avoid alerts you
don’t need to hear because you are stopped or moving slowly. By sensing
the “revs” (RPMs) of your engine, IntelliMute knows when you are at low
speed and automatically mutes alerts (except for strobe signals from
emergency vehicles).
Before IntelliMute will work, you must set an activation point for your engine’s
revs (see page 11). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled
each time the power is turned on. The factory setting is
IntelliMute
off.
NOTE
IntelliMute may not work with some vehicles because it cannot sense
the engine’s revs. In such cases, you can reduce unwanted audio alerts
by using
Auto Mute
and
City
mode when appropriate.
IntelliMute Button
Press and release
To Turn IntelliMute On
Press and release
the
IntelliMute
button.
Tone
Voice
Visual Display
Two beeps
IntelliMute On
i
appears in
the display
To Turn IntelliMute Off
Press and release
the
IntelliMute
button again.
Tone
Voice
Visual Display
One beep
IntelliMute Off
None
IntelliMute On
i h
10216_XRS9540_PH2.qxd 8/7/07 1:28 PM Page 9
