background image

Introduction

A3

Facts About
Safety Alert

®

Traffic Warning
System

Note

Strobe Alert™ is available in
over 1,000 cities and works
with Tomar and Opticom
systems. Call your local
Fire/Police department for
your area coverage or area in
which you will be traveling.

Facts About the Safety Alert® Traffic 
Warning System

FCC-approved Safety Alert® Transmitters emit microwave radar signals
to indicate the presence of a safety-related concern. Depending on the
frequency of these signals, as set on the transmitter, the outgoing
signal can indicate whether the transmitter is on a speeding
emergency vehicle or train, or at a stationary road hazard location.
These microwave signals are located in the K-band and as a result, any
radar detector which detects K-band radar will detect these Safety
signals as standard K-band radar alerts. However, unlike a standard
radar detector, your Cobra® XR-1010 is designed to differentiate
between a standard K-band alert and a Safety Alert® warning. Safety
technology is relatively new so the number of transmitters in operation
is still growing. You may not receive Safety Alert® on a daily basis and
should not be surprised to encounter some emergency vehicles, road
hazards or trains not yet equipped with these transmitters, therefore
failing to provide a signal. As Safety Transmitters become more
prevalent (the number of operating transmitters is growing every day),
these Safety Alert®s will become more common. The Safety Alert®
Transmitter is in use in all 50 states in limited quantities.

Thank you for purchasing Cobra®’s XR-1010, the worlds first 10-band™
Radar/Laser Detector with Digital Signal Processing. It features a high
speed RISC digital processor, similar to those used in high end personal
computers. The result–incredibly high sensitivity and virtually no false
alerts. In addition, the the UltraBright™ Data Display provides easy
recognition of band detected by use of band identification letters.

Customer Support

Should you encounter any problems with the product or not
understand its many features, please refer to this owner’s manual. If,
after referring to the manual, you still need help, call Cobra® Customer
Service at 773.889.3087.

Cobra®

Customer Service

Live operators are available 
M-F 8:00 am - 6:00 pm CST
at: 773.889.3087

Automated Technical
Assistance available 24 hours 
a day, seven days a week.
E-mail questions to:
[email protected]

Cobra on the World Wide Web:
Frequently Asked Questions
(FAQ) can be found on-line at:
www.cobra.com

BAND

+

-

1

2

11

Controls and Indicators

A2

3

5

2

1

11

1.

Power Button

2.

Volume Control

3.

Mute Button

4.

Dim Button

5.

Audio Alerts Speaker

6.

Highway/City Button

7.

UltraBright

TM

Data Display

8.

LaserEye®

9.

Windshield Bracket 
Mount

10.

12V DC Power Jack

11.

Audio Jack

6

10

9

4

8

7

8

Summary of Contents for XR-1010

















Reviews: