Cobra SRX8, Instruction Manual

Page: 11 / 56

11
REaR aSSEmbly
STEp 16 STEp 17
Note the correct grommet position.
After building the differential with new gears, new differential case
and bearings, the diff may feel a little tight. The connected parts need
at least an hour run-time to create a perfect match. Attention: When
you assemble the diff with too much initial play, the gears will not run-in
properly and may wear quickly. After 1 or 2 hours of
running the car, re-check the gear-mesh between the
ring gear and the pinion. All parts should have run-in
properly now. You may add or remove 8x11x0.1 shims
as needed.
16.1
16.2
1
2
3
4
2.5x13
8x16x5
8x11x0.1
5x13x4
M5x6
M3x14
M3x12
Flanged
1
2
2
3
8x11x0.1
2.5x13
8x16x5
5x13x4
M3x14
M3x12 Flanged
Note the correct
coupler assemby.
bag 2