8
●
For your own safety, replace worn or damaged parts without delay.
●
Remember that on equipments with blades or spring tines, the movement of one unit may result
in the other element starting to rotate.
●
While you are adjusting the equipment, take care not to jam your fingers between moving
blades/spring tines and stationary parts of the equipment.
●
Allow the motor to cool before you put the equipment away for any extended period of time.
●
While you are carrying out maintenance work on the blades/spring tines, it is important to
remember that the blades can still be moved even if the drive has been switched off.
●
For your own safety, replace worn or damaged parts without delay. Use only original
replacement parts and original accessories.
●
If the equipment is stopped for maintenance, inspection or storage purposes or in order to
replace an accessory, you must switch off the drive, pull the safety plug from the equipment and
make sure that all moving parts have come to a complete standstill. Allow the equipment to cool
before carrying out any inspections, adjustment
,
etc. Treat the equipment with care and keep
it clean.
●
keep the equipment where it is out of children's reach.
Service
Have your power tool repaired only by trained personnel using only genuine replacement parts.
This will ensure that your power tool remains safe to use.
CAREFUL HANDLlNG AND USE OF CORDLESS EQUIPMENT
●
Ensure that the equipment is switched off before you insert the battery. Inserting a battery into
an electric tool that is switched on can cause accidents.
●
Only charge the batteries in chargers that are recommended by Cobra. A charger that ís
designed for a certain type of batteries may pose a fire risk if it is used with other types of
batteries.
●
Use only the correct batteries in the electric tools. The use of other batteries may result in
injuries and a fire risk.
●
Keep unused batteries away from paper clips, coins, keys, nails, screws and other metallic
objects that could cause a short circuit between the contacts. A short circuit between the battery
contacts may cause burns or a fire.
●
In case of incorrect use, fluid may escape from the battery. Avoid contact with it. If you touch it
by mistake, rinse the affected area with water. lf you get the fluid in your eyes, also seek
medical advice. Leaking battery fluid can cause skin irritation or burns.
Additional safety instructions
Cobra design every battery pack to ensure that we supply you with batteries which feature
maximum power density, durability and safety. The battery cells have a wide range of safety
devices. Despite all the safety precautions, caution must always be exercised when handling
batteries. The following points must be completed at all times to ensure safe use. Safe use can
only be guaranteed if undamaged cells are used. Incorrect handling can cause cell damage.
Important:
Incorrect use and poor care are the main causes of the damage caused by high
performance batteries.
Safety Advice for Rechargeable Battery and Charger
Use only the battery provided with the scarifier and the provided charger.
Protect the battery and battery charger from humidity.
