14
Fig.2P Fig.2Q
5.5 ADJUSTMENT FOR AN APPROPRIATE HEIGHT
1.Pull the locking lever opening;
2.Rotating the upper handle centered of the angle, adjusting the gear for the appropriate between 0º to 16º as
the Fig.2R shown;
3.Push the locking lever closed to connect the lower handle and the unit body.
Fig.2R
6. ADJUSTING THE WORKING DEPTH
The working depth is set with depth adjusting knob, the depth can be adjusted from -10mm to +5mm.
(Fig.3A/ Fig.3B)
Fig.3A Fig.3B
WARNING:
Make this adjustment only when the blade has stopped.
The angle adjusting gear
Latch
button
