Cobra RM46SPCE Owner'S Manual Download

Page: 13 / 19

- 13 -

1. Stop mower and disconnect the spark plug cable before changing the mower cutting height.

2. The central height adjustment lever offers you 6 different height positions.

3. To change the height of cut, pull the adjuster lever away from the engine out of the slots and then move

either up or down to select the required height of cut. Push the lever back into the slot to secure.

7. MAINTENANCE INSTRUCTIONS

SPARK PLUG

Use only the original replacement spark plug. For best results, replace the spark plug every 100 hours of use.

8. LUBRICATION INSTRUCIONS

CAUTION:

DISCONNECT THE SPARK PLUG BEFORE SERVICING.

1. WHEELS-Lubricate the ball bearings in each wheel at least once a season with a light oil.

2. ENGINE-Follow engine manual for lubrication instructions.

9. CLEANING

CAUTION:

Do not hose the engine. Water can damage the engine or contaminate the fuel system.

1. Wipe deck with a dry cloth.

2. Hose under the deck by tilting the mower, so that the spark plug is up.

9.1 ENGINE AIR FILTER CLEANER

CAUTION: Do not allow dirt or dust to clog the air filter foam element. The engine air cleaner element must be

serviced (cleaned) after 25 hours of normal mowing. The foam element must be serviced more frequently if the

mower is used in dry and dusty environments.

TO CLEAN THE AIR FILTER:

1. Lift the tabs on top of the filter cover.

2. Remove cover.

3. Wash filter element in soap and water.

DO NOT USE PETROL!

4. Air dry the filter element.

5. Place a few drops of SAE30 oil on the foam filter and squeeze tightly to remove any excess oil.

6. Reinstall the filter.

Fig.11C for Cobra engine Fig.11D for Cobra engine

NOTE:

Replace the filter if frayed, torn, damaged or unable to be cleaned.

9.2 CUTTING BLADE

CAUTION:

Be sure to disconnect and ground the spark plug wire before working on the cutting blade to

prevent accidental engine starting. Protect hands by using heavy gloves or a rag to grasp the cutting

blades .Tip the mower as specified in the separate engine manual. Remove the hex bolt and washer which

holds the blade and blade adapter to the engine crankshaft. Remove the blade and adapter from the

crankshaft.

Summary of Contents for RM46SPCE




















Search results

Summary of Contents for RM46SPCE

Reviews:

Related manuals for RM46SPCE

Brands by name

Popular brands

Cobra RM46SPCE, Owner'S Manual

Search results

Summary of Contents for RM46SPCE

Reviews:

Related manuals for RM46SPCE

Brands by name

Popular brands