- 10 -
- Only move at a walking pace.
- Regularly clean mulching wedge, housing inner side and mowing blade.
Starting Operation
ONE: Retrofitting for mulching mower
WARNING:
only with a stopped engine and standstill cutter.
1. Raise the rear cover and remove the grass catcher.
2. Push the mulching wedge into the deck. Lock the mulching wedge with the button into the opening on the deck. (Fig 7A/Fig
7B/Fig.7C)
3. Lower the rear cover again.
Fig.7A Fig.7B Fig.7C
TWO: Resetting for side-discharge mowing
Only when the engine and cutting blade are at standstill!
1. Lift the rear cover and remove the grass catcher.
2. Mount the mulching wedge.
3. Lift the sideward flap for
side discharge. (Fig.8A)
4. Mount the discharge guide for side discharge on the support pin of the sideward flap. (Fig.8B/Fig.8C)
5. Lower the sideward flap- the flap lies on the discharge channel. (Fig.8D)
Fig.8A Fig.8B Fig.8C
THREE: Mowing with the grass catcher
WARNING: only with a stopped engine and standstill cutter blade.
For mowing with the grass catcher, remove the mulching wedge and discharge channel for side discharge and mount the grass
catcher.
1. Removing the mulching wedge: