Nothing
comes close to a Cobra
®
DSC Operation
65
Sending A Position Send
Position Send uses your connected GPS in similar
fashion to the position request function, except that
you initiate the activity to let another station know
where you are.
To Send A Position Send Message:
1. In Standby mode, select a channel on which you want
to communicate.
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to
POS SEND
(position send).
4. Press the Call/Set button to enter the individual directory.
5. Use the Up/Down buttons to select the station
to which you want to send your position.
6. Press the Call/Set button to send your position.
After your position is sent, the LCD will show
POS SEND
(position send). You will have two (2) choices.
■
Resend your position to the same station.
■
Exit from Position Send mode.
a. To Resend Your Position:
1) Use the Up/Down buttons to select
SEND
.
2) Press the Call/Set button to resend your position.
b. To Exit From The Position Send Mode:
1) Use the Up/Down buttons to select
EXIT
.
2) Press the Call/Set button to return to the
Call Send menu.
Receiving A Position Send
When another station sends you its position in Position
Send mode, the individual alarm will sound and the station’s
name and position will be shown on the LCD. Press any
button to turn Off the alarm and return to Standby mode.
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
Transmit Position
Send/Exit
Position Send
Standby Mode
Individual Directory
Position Send
64 English
DSC Operation
Receiving A Position Request
When you went through the DSC set-up process, you set a position request reply
type. (See page 52 to change your setting.) Depending on the setting you chose,
when a Position Request message is received, your radio will enter either:
■
The Auto Reply mode.
■
The Manual Reply mode.
When The Radio Is In Auto Reply Mode:
A position request will sound the position request
alarm and show the name of the requesting station
on the LCD. Your radio will automatically respond.
It will send your position, if you have a GPS connected
to your radio, or
NO POS DATA
(no position data),
if you do not have a GPS device connected.
1. Press any button to silence the alarm and
exit the display.
When The Radio Is In The Manual Reply Mode:
A position request message will sound the position
request alarm and show the name of the requesting
station. You can choose to:
■
Reply and send your position.
■
Exit without sending your position.
a. If You Choose To Reply With Your Position:
1) Use the Up/Down buttons to select
REPLY
.
2) Press the Call/Set button to send your position.
3) Press any button to return to Standby mode.
b. If You Choose Not To Reply:
1) Use the Up/Down buttons to select
EXIT
.
2) Press the Call/Set button to return to Standby
mode without sending your position.
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
Position Request
Position Request
Reply/Exit
