Customer Assistance
Warranty
Introduction
Operation
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
While setting channel scan, if you do not press any buttons for
15 seconds your radio will automatically return to
Standby
mode
on the channel or channel/privacy code displayed before you
entered mode functions.
During scanning (while receiving an incoming transmission),
you can choose from the following:
a.
Press and hold the
Talk
button to communicate on
that channel. Your radio will remain on that channel
and return to
Standby
mode.
b.
Press the
Channel Up
or
Channel Down
button to
resume scanning channels.
If you press the
Talk
button while scanning and not within
10 seconds of receiving a transmission, you will transmit
on the channel on which you last received a transmission.
This will return the radio to
Standby
mode.
If you do not press any button within 10 seconds,
your radio will automatically resume scanning channels.
During scanning (while not receiving a transmission),
you can choose from the following:
a.
Press and hold the
Talk
button to communicate on the
channel or channel/privacy code that was displayed before
you entered mode functions or the channel on which,
during scanning, you last received a transmission.
This will return the radio to
Standby
mode.
b.
Press the
Mode/Power
button to proceed to set privacy
code scan on the channel that was either displayed before
you entered mode functions or on which, during channel
scanning, you last received a transmission (see page 10
for further details).
c.
Press the
Lock
button to return to
Standby
mode on the
channel/privacy code that was displayed before you entered
mode functions or the channel on which, during scanning,
you last transmitted or received.
Operation
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
Mode Functions
NOAA* All Hazards Radio Channels
•
You can use your microTALK
®
radio to listen to
NOAA
All Hazards Radio
channels transmitting in your area.
To listen to all hazards radio channels :
1.
Press the
Mode
button until the
Weather
(All
Hazards Radio) icon and the currently selected
All Hazards Radio channel is displayed.
2.
Use the
Channel Up
or
Channel Down
button
to change All Hazards Radio channels.
Weather
(All Hazards Radio) icon will continue
to be displayed when All Hazards Radio is
on
.
3.
Choose one of the following:
a.
Press the
Mode
button to proceed
to other functions.
b.
Press the
Lock
button to exit
All Hazards
Radio
channels mode and return to
Standby
mode.
*National Oceanographic and Atmospheric Administration
Channel Scan
•
Your microTALK
®
radio can automatically scan channels.
To scan channels:
1.
Press the
Mode/Power
button until the
Scan
icon and the channel numbers flash
on the display.
2.
Press the
Channel Up
or
Channel Down
button to begin scanning channels.
The radio ignores specific privacy
codes while scanning channels.
The
Scan
icon will continue to be displayed
when scan is
on
. Your radio will continue to
scan all channels and stop if an incoming
transmission is detected. Your radio will
remain on that channel for 10 seconds.
Mode/Power Button
Channel Button
Scan Channels
English
8
9
Nothing
comes close to a Cobra
®
Mode/Power Button
Channel Button
Hazards Radio Icon
