background image

Operation

Warranty

Introduction

27

Nothing 

comes close to a Cobra

®

Customer Assistance

26 English

Licensing, Assistance &Warranty

IMPORTANT NOTICE: FCC LICENSE REQUIRED

This two-way radio operates on GMRS (General Mobile Radio Service) frequencies which 
require an FCC (Federal Communications Commission) license. A user must be licensed prior 
to operating on channels 1 through 7 or 15 through 22, which comprise the GMRS channels 
of this radio. Serious penalties could result for unlicensed use of GMRS channels, in violation 
of FCC rules, as stipulated in the Communications Act’s Sections 501 and 502 (amended). 

Licensed users will be issued a call sign by the FCC, which should be used for station
identification when operating this radio. GMRS users should also cooperate by engaging 
in permissible transmissions only, avoiding channel interference with other GMRS users, 
and being prudent with the length of their transmission time. 

For licensing information and application forms, please call the FCC Hotline at 
800-418-FORM. Request form #159 and form #605. Questions regarding the license 
application should be directed to the FCC at 888-CALL-FCC. Additional information 
is available on the FCC’s website at www.fcc.gov.

Safety Information for microTALK

®

Radios

Your wireless handheld portable transceiver contains a low power transmitter. When the Talk
button is pushed, it sends out radio frequency (RF) signals. The device is authorized to operate 
at a duty factor not to exceed 50%. In August 1996, the Federal Communications Commissions
(FCC) adopted RF exposure guidelines with safety levels for handheld wireless devices. 

Important:
FCC RF Exposure Requirements: For body-worn operation, this radio has been tested and meets
the FCC RF exposure guidelines when used with Cobra

®

accessories supplied or designated for

this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
Use only the supplied antenna. Unauthorized antennas, modifications, or attachments could
damage the transmitter and may violate FCC regulations. 

Normal Position: 
Hold the transmitter approximately 2 inches from your face and speak in a normal voice, 
with the antenna pointed up and away.

Customer Assistance

If you have any questions about operation or installing
your new Cobra

®

product, or if you are missing parts…

Please call Cobra

®

first! DO NOT RETURN THIS PRODUCT

TO THE STORE! See customer service on page 2.

Product Service Questions

If your product should require factory service, please call Cobra

®

first before sending your radio. 

This will ensure the fastest turn-around time on your repair. You may be asked to send your radio to the
Cobra

®

factory. It will be necessary to furnish the following to have the product serviced and returned.

1) For Warranty Repair include some form of proof-of-purchase, such as a mechanical reproduction
or carbon of a sales receipt. If you send the original receipt, it cannot be returned;  2) Send the entire
product;  3) Enclose a description of what is happening with the radio. Include a typed or clearly
printed name and address of where the radio is to be returned;  4) Pack radio securely to prevent
damage in transit. If possible, use the original packing material;  5) Ship prepaid and insured by way
of a traceable carrier such as United Parcel Service (UPS) or First Class Mail to avoid loss in transit
to Cobra

®

Factory Service, Cobra

®

Electronics Corporation, 6500 West Cortland Street, Chicago,

Illinois 60707 USA;  6) If the radio is in warranty, upon receipt of your radio it will either be
repaired or exchanged depending on the model. Please allow approximately 3 – 4 weeks before
contacting Cobra

®

for status. If the radio is out of warranty, a letter will automatically be sent

informing you of the repair charge or replacement charge. If you have any questions, please call
773-889-3087 for assistance.

Limited 1-Year Warranty

For Products Purchased in the U.S.A.

Cobra

®

Electronics Corporation warrants that its Cobra

®

GMRS Radios, and the component parts

thereof, will be free of defects in workmanship and materials for a period of one (1) year from the
date of first consumer purchase. This warranty may be enforced by the first consumer purchaser,
provided that the product is utilized within the U.S.A. Cobra

®

will, without charge, repair or replace,

at its option, defective GMRS radios, products or component parts upon delivery to the Cobra

®

Factory Service department, accompanied by proof of the date of first consumer purchase, such
as a duplicated copy of a sales receipt. You must pay any initial shipping charges required to ship
the product for warranty service, but the return charges will be at Cobra

®

’s expense, if the product

is repaired or replaced under warranty. This warranty gives you specific legal rights, and you may
also have other rights which may vary from state to state.

Exclusions:  This limited warranty does not apply:  1) To any product damaged by accident;  
2) In the event of misuse or abuse of the product or as a result of unauthorized alterations or
repairs;  3) If the serial number has been altered, defaced, or removed;  4) If the owner of the
product resides outside the U.S.A.

All implied warranties, including warranties of merchantability and fitness for a particular purpose
are limited in duration to the length of this warranty. Cobra

®

shall not be liable for any incidental,

consequential or other damages; including, without limitation, damages resulting from loss of 
use or cost of installation. Some states do not allow limitations on how long an implied warranty
lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, 
so the above limitations may not apply to you.

For products purchased outside the U.S.A., please contact your local dealer for 
warranty information.

Warranty

This device complies with part 15 of the FCC Rules. Operation is subject to 
the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.

FCC Warnings: Replacement or substitution of transistors, regular diodes or
other parts of a unique nature, with parts other than those recommended by
Cobra

®

may cause a violation of the technical regulations of part 95 of the FCC

Rules, or violation of type acceptance requirements of part 2 of the Rules.

Summary of Contents for microTALK PR4300WX















Reviews: