background image

Introduction

Operation

23

Nothing 

Comes Close to a Cobra

®

Licensing

For Products Used in Canada

Industry Canada Notice 

Operation is subject to the following two conditions: 1) this device may not cause
interference, and 2) this device must accept any interference, including interference
that may cause undesired operation of the device.

«IC» before the equipment certification number signifies that the Industry Canada
technical specifications were met. It does not guarantee that the certified product 
will operate to the user’s satisfaction.

For Products Used in the U.S.A.

FCC Licensing Required

This two-way radio operates on GMRS (General Mobile Radio Service) frequencies
which require an FCC (Federal Communications Commission) license. A user must be
licensed prior to operating on channels 1 through 7 or 15 through 22, which comprise
the GMRS channels of this radio. Serious penalties could result for unlicensed use 
of GMRS channels; operation of this radio is subject to additional rules specified in 
47 C.F.R. Part 95.

Licensed users will be issued a call sign by the FCC, which should be used for station
identification when operating this radio. GMRS users should also cooperate by engaging
in permissible transmissions only, avoiding channel interference with other GMRS
users, and being prudent with the length of their transmission time.

For licensing information and application forms, please call the FCC Hotline at 
800-418-FORM. Request form #159 and form #605. Questions regarding the 
license application should be directed to the FCC at 888-CALL-FCC. Additional
information is available on the FCC’s website at www.fcc.gov.

Safety Information for microTALK

®

Radios

Your wireless handheld portable transceiver contains a low power transmitter. 

When the talk button is pushed, it sends out radio frequency (RF) signals. 

The device is authorized to operate at a duty factor not to exceed 50%. 

In August 1996, the Federal Communications Commission (FCC) adopted 

RF exposure guidelines with safety levels for handheld wireless devices. 

Important: 

FCC RF Exposure Requirements: For body-worn operation, this radio has 

been tested and meets the FCC RF exposure guidelines when used with 

Cobra accessories supplied or designated for this product. Use of other

accessories may not ensure compliance with FCC RF exposure guidelines. 

Use only the supplied antenna. Unauthorized antennas, modifications, 

or attachments could damage the transmitter and may violate FCC regulations. 

Normal Position: 

Hold the transmitter approximately five cm (two inches) from your face 

and speak in a normal voice, with the antenna pointed up and away.

English

Licensing and 
Product Service

22

Customer Assistance

Product Service

If you have any questions about operation or installing your new Cobra product, 
or if you are missing parts… 

Please call Cobra first! DO NOT RETURN THIS

PRODUCT TO THE STORE! See customer assistance on page A1.

For Products Purchased in Canada

For out of warranty service, ship this product prepaid to: AVS Technologies Inc., 
2100 Trans Canada Hwy S., Montreal, Quebec, H9P 2N4, www.cobra.ca. We reserve
the right to repair or replace the radio with an equivalent product. Please include the
following information: Date of Purchase, Model Number, Dealer Purchased From,
Dealer Address, Dealer Phone Number.

For Products Purchased in the U.S.A.

If your product should require factory service, please call Cobra first before sending
your radio. This will ensure the fastest turn-around time on your repair. You may be
asked to send your radio to the Cobra factory. It will be necessary to furnish the
following to have the product serviced and returned.

1) For warranty repair include some form of proof-of-purchase, such as a mechanical

reproduction or carbon of a sales receipt. If you send the original receipt, it cannot
be returned. 

2) Send the entire product. 

3) Enclose a description of what is happening with the radio. Include a typed or

clearly printed name and address of where the radio is to be returned. 

4) Pack radio securely to prevent damage in transit. If possible, use the original

packing material. 

5) Ship prepaid and insured by way of a traceable carrier such as United Parcel Service

(UPS) or Priority Mail to avoid loss in transit to Cobra Factory Service, Cobra
Electronics Corporation, 6500 West Cortland Street, Chicago, Illinois 60707 U.S.A. 

6) If the radio is in warranty, upon receipt of your radio, it will either be repaired or

exchanged depending on the model. 

Please allow approximately three to four weeks before contacting Cobra for status. 
If the radio is out of warranty, a letter will automatically be sent informing you of 
the repair charge or replacement charge. If you have any questions, please call 
773-889-3087 for assistance.

For Products Purchased Outside the U.S.A. or Canada

Please contact your local dealer for product service information.

Warranty

Customer Assistance

This device complies with part 15 of the FCC Rules. Operation is subject 
to the following two conditions: 1) This device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.

FCC Warnings

: Replacement or substitution of transistors, regular diodes or

other parts of a unique nature, with parts other than those recommended by
Cobra may cause a violation of the technical regulations of part 95 of the FCC
rules, or violation of type acceptance requirements of part 2 of the rules.

 

Summary of Contents for microTALK PR3850WXC

















Reviews: