2.
Press the MODE button
until the Dual Watch icon
flashes.
3.
Push the CHANNEL
SELECT button up or
down to select the second
channel you wish to monitor.
4.
Press the MODE button. The privacy code flashes.
5.
Push the CHANNEL SELECT button up or down to select
the second privacy code.
6.
Press and release the ENTER button to store the second
channel/privacy code and engage Dual Watch.
7.
To terminate Dual Watch and return to normal Standby
mode, press and release the ENTER or TALK button.
Turning Roger Beep Off and On
With Roger Beep turned on, your listener will hear an
audible tone when you release the TALK button. To change
Roger Beep mode:
1.
Press the MODE button
until the Roger Beep icon
flashes and the current
setting (“on” or “off”)
is displayed.
2.
Push the CHANNEL
SELECT button up or down
to turn Roger Beep on or off.
3.
Press and release the ENTER button to enter the new
setting, or press the MODE button to enter the new setting
and proceed to other functions.
Turning Keystroke Tones Off and On
With Keystroke Tones turned on, your unit will sound
beeps each time you press a button or change a setting.
To change Keystroke Tones mode:
1.
Press and hold the
ENTER button for 5 seconds
to turn keystroke tones off.
A double beep will sound
and the Beep icon will
disappear.
2.
To turn keystroke tones
back on, press and hold
the ENTER button for 5
seconds again. A double
beep will sound and the
Beep icon will appear.
(NOTE: The unit must not
be in Lock mode during these steps.)
Changing Call Tone Settings
You can choose from five different call tone settings to
alert you when someone is calling. To select a call tone
setting:
1.
With the power turned off, press and hold the CALL
button as you turn the power on. The number of the
current call tone setting will flash and the tone will sound
for one second.
2.
Push the CHANNEL SELECT button up or down to hear
the other call tone settings.
3.
With the number of your desired call tone setting
displayed, press and release the TALK button or ENTER
button. Your selection will be entered.
4.
If no buttons are pushed for 15 seconds, the unit will
automatically enter the last call tone pattern that was
displayed.
Intercom
With the optional intercom adapter and two external
speaker/microphone attachments, a single microTALK
®
radio can be used as an intercom system. (Ideal for
motorcyclists.)
A D VA N C E D F E AT U R E S
ENTER
button
