![background image](http://html1.mh-extra.com/html/cobra/microtalk-mt-900/microtalk-mt-900_owners-manual_2631202004.webp)
Calling Another Person
To alert another person that
you are calling:
1.
Press and release the
CALL button. The other
person will hear a 2-second
ringing tone.You cannot send
or receive transmissions during the 2-second call tone.
Talking to Another Person
1.
Press and hold the TALK
button.
2.
With the microphone
about 5 cm (2 inches) from
your mouth, speak in a
normal voice.
3.
Release the button when
you have finished talking and
listen for a response. You
cannot receive incoming calls
while pressing the TALK button.
“Roger Beep”
Confirmation Tone
Your listener will hear an audible tone when you release the
TALK button. This alerts the other party that you have
finished talking and it is OK for them to speak.
(
NOTE:
The Roger Beep can be turned off and on, see
Advanced Features.)
Listening for a Response
When you have finished talking:
1.
Release the TALK button to receive incoming
transmissions. The radio is always in Standby mode except
when the TALK, CALL, or MODE buttons are pressed.
2.
Adjust the volume by rotating the ON-OFF/VOLUME switch.
microTALK
®
Range
Your microTALK
®
radio has a range of up to 3 km
(2 miles). Your range will vary depending on terrain and
conditions. In flat, open country your radio will operate at
maximum range. Buildings and foliage in the path of the
signal can reduce the range. Dense foliage and hilly terrain
will further reduce the signal.
Auto Squelch
Your microTALK
®
radio is equipped with Auto Squelch,
which automatically shuts off weak transmissions and
unwanted noise due to terrain conditions or if you’ve
reached your maximum range limit.
Maximum Range Extender
You can temporarily turn off Auto Squelch, allowing all
signals to be received and extending the maximum range
of your radio:
1.
Press and hold the LIGHT/
MAX RANGE button for
5 seconds. You will hear
2 beeps indicating that
Maximum Range Extender is on.
2.
To turn Maximum Range
Extender off, press and hold the LIGHT/MAX RANGE button
for 1 second, or change channels.
Using the Lock Function
The Lock function locks the CHANNEL, MODE and ENTER
buttons to prevent accidental operation. To use the Lock
function:
1.
While in Standby mode, press and hold the LOCK button
for one second. The Lock icon will blink when the unit is
locked. Buttons that are NOT locked are the CALL,
LIGHT/MAX RANGE, and TALK buttons, which are all fully
functional while the unit is locked.
2.
To unlock buttons, press and release the LOCK
button again. The Lock icon disappears and all buttons
will be unlocked.
O P E R AT I O N
5 cm
TALK
button
LIGHT/MAX
RANGE
button
LOCK
button
CALL
button