Five Call Tone Settings
•
You can choose between five different
Call Tone
Settings to transmit a call alert.
To change a
call tone setting
:
1.
Press the
Mode/Power
button until the
letter “C” and the current call tone number
(01 through 05) is displayed. The current
call tone will sound for four seconds.
2.
Press the
Channel Up
or
Channel Down
button to hear the other
call tone settings.
3.
Choose one of the following:
a.
Press the
Mode/Power
button to enter the new setting and proceed to
other functions.
b.
Press
Talk
or
Call
button to
return to Standby mode.
c.
Do not press any buttons for 12 seconds to return to Standby
mode.
12
English
13
Using Your Radio
Using Your Radio
Privacy Code Scan
•
Your microTALK radio can automatically scan the
Privacy Codes
(either CTCSS 01 through 38 or DCS 01
through 83) within one channel. Only one set of privacy codes (CTCSS or DCS) can be scanned at a time.
To scan privacy codes:
1.
While in
Standby
mode, press the
Channel Up
or
Channel Down
button to
choose the channel on which you wish to scan privacy codes.
2.
Press the
Scan
button twice until either the CTCSS or the DCS icon appears on
the display and the privacy code numbers flash on the display.
3.
Press the
Channel Up
or
Channel Down
button to begin scanning privacy
codes within the channel you selected.
During scanning (while receiving an incoming transmission), you can choose
from the following:
a.
Press and hold the
Talk
button to communicate on that channel/privacy code.
Your radio will remain on that channel/privacy code and return to
Standby
mode.
b.
Press the
Channel Up
or
Channel Down
button to resume scanning privacy
codes. If you do not press any button within 10 seconds, your radio will
automatically resume scanning privacy codes.
c.
Press the
Talk/Call
button to return to
Standby
.
Select Channel
Scan Privacy Codes
Call Tone Setting
VOLUME
CALL
MODE
CHANNEL
SCAN
Channel Button
Roger Beep Confirmation Tone
•
Your listener will hear an audible tone when you release the
Talk
button. This alerts the other party that
you are finished talking and it is ok for them to speak.
To turn roger beep on and off:
1.
Press the
Mode/Power
button until the
Roger Beep
icon flashes. The current
on
or
off
setting is displayed.
2.
Press the
Channel Up
or
Channel Down
button to select roger beep
on
or
off
.
3.
Choose one of the following:
a.
Press the Mode/Power button to enter the new setting and proceed to other
functions.
b.
Press the
Lock
button to transmit the call tone return to
Standby
.
VOLUME
CALL
MODE
CHANNEL
SCAN
Channel Button
Roger Beep Off
CALL
MODE
SCAN
Mode/Power
CALL
MODE
SCAN
Mode/Power
CALL
MODE
SCAN
Scan Button
Key Tone On/Off
•
When
Key Tone
is
On
, an audible tone will sound each time a button is pressed.
To turn key tone on and off:
1.
Press the
Mode/Power
button until the
Key Tone
icon flashes. The current
on
or
off
setting is displayed.
2.
Press the
Channel Up
or
Channel Down
button to select key tone
on
or
off
.
3.
Choose one of the following:
a.
Press the Mode/Power button to enter the new setting and proceed to other
functions.
b.
Press the
Lock
button to transmit the call tone return to
Standby
.
VOLUME
CALL
MODE
CHANNEL
SCAN
Channel Button
Key Tone Off
CALL
MODE
SCAN
Mode/Power
c.
Do not press any buttons for 12 seconds to return to
Standby
mode.
c.
Do not press any buttons for 12 seconds to return to
Standby
mode.
