43
Nothing
Comes Close to a Cobra
®
Mobile Phone Operation
With
Bluetooth
®
Using Voice Dial
This feature allows you to use your voice to dial a contact
from the contact list on your mobile phone.
NOTE
Voice dialing is an advanced function and may not be
supported by all phones. Cobra suggests you set it up
and become familiar with it on your mobile phone
before you attempt using it in conjunction with the
radio or another Bluetooth device.
To Initiate a Voice Dial Call:
1.
Press and release the
Bluetooth
button to enter the
Bluetooth Standby
mode.
2.
Press and release the
Bluetooth
button twice (2x)
from
Bluetooth Standby
mode. This will initiate the
voice dial feature on the connected mobile phone.
3.
You will hear a beep or audio command from the phone.
Press and hold the
PTT
(Push to Talk) button and
speak the name into the radio.
4.
The mobile phone will begin to dial the contact
it “recognizes.” The call will be completed through
the speaker and microphone of the radio. The matrix
will display
DIALING
and
IN CALL
as the call
is completed.
5.
Hang up by pressing the
Bluetooth
button when
you complete your call.
MEM
ATIS
VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
MEM
SAME
Connecting a Voice Dial Call
MEM
SAME
ATIS
VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
MEM
SAME
Initiating a Voice Dial Call
VHF Marine Radio Protocols
Operating Your Radio
42 English
Mobile Phone Operation
With
Bluetooth
®
VHF Marine Radio Protocols
Operating Your Radio
Last Number Redial
This feature allows you to redial the last number stored in the
mobile phone’s internal Call Log. This feature is supported by
most mobile phones.
To Initiate a Last Number Redial:
1.
Press and release the
Bluetooth
button to enter the
Bluetooth Standby
mode.
2.
From
Bluetooth Standby
, press and hold the
Bluetooth
button for two (2) seconds [until the
radio beeps two (2) times].
3.
The connected mobile phone will redial the last
number. The call will be complete through the
speaker and microphone of the radio.
4.
Hang up by pressing the
Bluetooth
button when
you complete your call.
To Disconnect (At the End of the Day)
You might not want to take your calls through this VHF radio
once you are back at the dock or in a dry location. See the
instructions in the
Bluetooth Mode Programming
section on
page 23 for instructions on how to turn Off the
Bluetooth
function of the radio. The matrix will display
BLUETOOTH
RADIO OFF
.
NOTE
If switched to Off setting, then the radio will not
reconnect with mobile phone on power up. It must
be turned back On again from the
Bluetooth
Programming
mode.
MEM
ATIS
VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
MEM
SAME
MEM
SAME
ATIS
VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
MEM
SAME
EN
C
M
Bluetooth
Button
Bluetooth
Radio On
Bluetooth
Radio Off