Only straight-cut logs are suitable for use with the log
splitter.
Metal parts (nails, wire etc.) must be removed from logs
before splitting.
The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included
in the instructions.
Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
Unauthorised modifications on the log splitter exclude a
liability of the manufacturer for damages of any kind
resulting from it.
Only persons who are familiarised with the device and
informed about possible risks are allowed to prepare,
operate and service this device. Repair works may only be
carried out by us or by a customer service agent
nominated by us.
R
R
e
e
s
s
i
i
d
d
u
u
a
a
l
l
r
r
i
i
s
s
k
k
s
s
Even if used properly,
residual risks
can exist even if
the relevant safety regulations are complied with due to the
design determined by the intended purpose.
Residual risks can be minimised if the “Safety information” and
the “Intended usage” as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will
reduce the risk of personal injury or damage to the equipment.
Failure to observe the safety precautions can lead to injury
to the operator or damage to property.
Risk from electricity, by using non-standard electrical
connections.
Touching live parts of opened electrical components.
Risk of fire and slipping by leaking hydraulic fluid.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
S
S
a
a
f
f
e
e
w
w
o
o
r
r
k
k
i
i
n
n
g
g
Before commissioning this product, read and keep
to the following advice. Also observe the preventive
regulations of your professional association and the
safety provisions applicable in the respective country, in
order to protect yourself and others from possible injury.
L
Pass the safety instructions on to all persons who work
with the machine.
L
Keep these safety instructions in a safe place.
Make yourself familiar with the equipment before using it,
by reading and understanding the operating instructions.
Do not use the machine for unsuitable purposes (see
“Normal intended use” and “Working with the log splitter”).
Ensure that you have stand in a
secure standing position
and maintain your
balance
at all times.
Take a
working position
, which is behind the slide of the
area of the operating lever. Never stand in the splitting
wedge’s zone.
Never stand on top of the machine.
Pay attention
at all times. Take care with what you are
doing, and approach the work
sensibly
. One moment of
carelessness when using the device can result in serious
injuries
.
Do
not
use the machine:
−
when you are
tired
.
−
under the influence of drugs, alcohol or medications
that may impair your powers of judgement.
When working with the machine, always wear
−
protective goggles or face mask
−
safety gloves
−
ear protection, if necessary
−
safety shoes with steel toe-caps
Wear suitable work clothing:
−
do not wear any loose-fitting clothing or jewellery, since
these may be caught or trapped by moving parts
Within his area of work
the operator
is responsible for
third parties.
The machine may not be operated by
children or young
people under the age of 18
.
Keep
children
away form machine.
Never operate the machine if
other persons are in the
immediate vicinity
.
Never
leave the saw
unattended.
Keep your
workplace in an orderly condition
! Untidiness
can result in accidents.
Do not overload the machine! You work better and safer in
the
given performance range.
Only operate the machine with complete and correctly
attached
safety equipment
and do not alter anything on
the machine that could impair the safety.
Faulty
or
damaged parts
in the device must be replaced
immediately.
Do
not spray machine with water
(this is hazardous due to live components).
Do
not
leave the machine
standing in the rain
or use
when raining.
Store the
unused machine
in a dry locked place away
from the reach of children.
Switch the machine off and
remove the
mains plug from the socket
when
−
carrying out repair works
−
carrying out servicing and repair works,
removal of faults
−
transporting
−
leaving unattended (even during short interruptions)
Check the machine for possible damage
−
Before continuing to use the machine, the
protective
devices
must be inspected to ensure that they work
perfectly and with their intended function
−
Check whether the movable parts function perfectly
and do not stick or whether the parts are damaged. All
parts must be correctly installed and fulfil all conditions
to ensure perfect operation of the saw
2