background image

1. GENERAL SAFETY RULES 

Meaning of symbols marked on the product 

 

Read the user manual before 
using the machine 

 

Wear gloves to protect your 
hands 

 

Wear safety goggles to protect 
your eyes 

 

Wear safety boots to protect 
against elect    ric shock 

 

Wear ear protector to protect 
against noise 

 

Do not expose to rain 

 

Wear dust mask to protect 
against dust 

 

Remove plug from the mains 
immediately  if cable is 
damaged or cut 

 
WARNING! 

When using electric tools, basic safety precautions, including the following, should 

always be followed to reduce the risk of fire, electric shock and personal injury. 
Read all these instructions before operating this product and save these instructions. 
 

1.1 Before Using 

Study this manual thoroughly 

Familiarise yourself with the operation of the hedge trimmer and learn to use it properly. 

Never allow others (especially children) who have not read the manual to use the 

machine. 

If the unit must be given to other people, give them as this manual. 

Check that the voltage and frequency indicated on the specification label affixed to the 

electrical hedge trimmer correspond to the mains electricity supply. 

Never remove the labels or security elements.   

To connect the hedge trimmer to the power, use only appropriate and compliant power 

equipment in perfect condition. Use a flexible extension, brightly coloured for outdoor use with 
a maximum length of fifty meters with conductors of at least 12mm. 

Keep the cord away from the radius of action of the machine and make sure it is not 

subjected to tension. Move the cable from water, heat and sharp edges. 

Do not use the hedge trimmer if the trigger on / off does not work properly. If necessary, 

contact your dealer for any repair. 

Never expose the electric hedge trimmer to rain or moisture. Never allow water or other 

liquids enter the machine. 

Check the condition of the cutter blade, make sure it fastened and safe before each use. 

Replace excessively worn or missing parts. 

Do not cut near other electrical machines. 

Do not operate hedge trimmer in an environment with flammable items such as liquids, 

gases or dust. The sparks generated by the operation of the machine can cause an explosion. 

Do not start cutting until the work area is cleared and cleaned. Keep the work area clean 

and tidy to reduce the risk of accident. 

During the first use, it is recommended that the user be accompanied by an experienced 

Summary of Contents for HT550E















Reviews: