![background image](http://html.mh-extra.com/html/cobra/hh-33/hh-33_operating-instructions-manual_2631089006.webp)
LED DISPLAY
TRANSMIT / RECEIVE
To transmit, push the PTT button.
The Red TX LED will be displayed
during transmissions.
Hold the HH33 mic about 2 inches from
your mouth.
Speak into the microphone in a normal
voice.
Release the PTT button to receive incoming
transmissions.
**Note: While the PTT button is depressed,
you cannot receive transmissions.
The Green RX LED is displayed
when the radio is in receive mode.
11
10
PTT
OPERATION
SELECT CHANNEL/DISPLAY/TRANSMIT
SELECTING A CHANNEL
Turn on your HH33.
To select a higher channel, push the UP
arrow key.
To select a lower channel, push the DOWN
arrow key.
**Note: To quick advance channels, press and
hold the selection key.
• Red LED for TRANSMIT (TX)
• Green LED for RECEIVE (RX)
• Red BATT LOW Indicator
• Red SoundTracker™ “ON” Indicator
PTT
OPERATION
IN VEHICLE USE
IN VEHICLE USE
Your HH 33 can be connected
to a 12 volt power source with
the cigarette power cord adaptor
provided. Connect adaptor
as shown.
**Note: Due to the characteristics of
CB transmissions, it may be
difficult to transmit and
receive from inside your car.
Roof mounted antennas can
dramatically improve
transmissions and will
increase your range. You will
need a quality roof mount
antenna and a BNC/SO239
adapter. See accessories
section for details.