Quick Start
5
Turn On and Adjust Volume
Turn On and
Adjust Volume
Installation
4
Note
It will be easy for you to
remove and reinstall your
Cobra ESD-9150 detector at
any time using this hook
and loop material on the
dashboard.
Remember: Without the
means to adjust the angle
of the detector (when
mounted as above), be
sure you that your Cobra
ESD-9150 has a level,clear
view of the road before you
attach the hook and loop
material.
Note
Display Brightness, City/
Highway, Muting, VG-2
Audio Alert On/Off settings
and compass calibration
data are retained in
memory even when unit is
turned OFF or removed
from power source.
Note
The compass must be
calibrated before initial use.
For more detailed instru ct i o n s
on compass calibration,
see page 13.
Dash Mounting
Dash
Mounting
Plug power cord
into detector.
Plug power cord
i nto cigare t te lighte r.
Peel protective
paper off one side
of hook and loop
material.
Place on dash.
Peel top paper off.
Place detector on
hook and loop pad.
1
2
3
4
5
6
Rotate ON-OFF Volume Control to left (away
from you). Three beeps will be heard and all
LEDs will light up in sequence.
A compass LED will remain lit to indicate the
unit power is ON.
1
