18
19
Nothing
Comes Close to a Cobra
®
General Specifications
•
FRS/GMRS Frequency
Allocation and Compatibility
Important:
Please note that Cobra GMRS models with 15 Channels
may designate different channel numbers for the same frequency.
For example, a Cobra 15 Channel GMRS model would need to be
tuned to Channel 11 in order to communicate with a 22 Channel
GMRS tuned to Channel 15. Please refer to the chart below for
channel/ frequency number compatibility.
A = Channel No. for 22 Channel FRS/GMRS Models
B = Channel No. for 15 Channel GMRS Models
C = Type of Radio Service
D = Frequency in MHz
E = Power Output
A B C
D
E
1
1
FRS/GMRS
462.5625
High
2
2
FRS/GMRS
462.5875
High
3
3
FRS/GMRS
462.6125
High
4
4
FRS/GMRS
462.6375
High
5
5
FRS/GMRS
462.6625
High
6
6
FRS/GMRS
462.6875
High
7
7
FRS/GMRS
462.7125
High
8
FRS
467.5625
Low
9
FRS
467.5875
Low
10
FRS
467.6125
Low
11
FRS
467.6375
Low
12
FRS
467.6625
Low
13
FRS
467.6875
Low
14
FRS
467.7125
Low
15
11
GMRS
462.5500
High
16
8
GMRS
462.5750
High
17
12
GMRS
462.6000
High
18
9
GMRS
462.6250
High
19
13
GMRS
462.6500
High
20
10
GMRS
462.6750
High
21
14
GMRS
462.7000
High
22
15
GMRS
462.7250
High
General Specifications
and Licensing
Operation
Operation
Mode Functions
Tri-Watch Set-up
•
To Program or Edit the Tri-Watch Channels:
1.
Press and hold the
TRI-WATCH
button from
GMRS Standby
mode for two (2) seconds to
activate
Tri-Watch Setup
mode. The
MEM
icon
on the display will turn
ON
.
2.
Press
Channel
Up
or
Channel
Down
button to
select the desired
Tri-Watch
channel.
3.
Press and release
TRI-WATCH
button to
confirm entry.
4.
Repeat steps 2 and 3 to program the remaining
additional
Tri-Watch
memory channel.
5.
After programming both
Tri-Watch
memory
channels the radio will immediately engage
Tri-Watch
mode.
The main channel number will flash to
indicate channel position.
MEM
ESC
TRI
WATCH
SCAN
V
O
LUME
CALL
MODE
CHANNEL
H-M-L
Tri-Watch Button
MEM
ESC
TRI
WATCH
SCAN
V
O
LUME
CALL
MODE
CHANNEL
H-M-L
Channel Button
MEM
ESC
TRI
WATCH
SCAN
V
O
LUME
CALL
MODE
CHANNEL
H-M-L
Tri-Watch Button
Using Tri-Watch:
1.
From
GMRS Standby
mode, press the
TRI-WATCH
button. The
TW
will appear in the display along with
the three channels stored in the
Tri-Watch
memory.
2.
The radio will scan through the three (3)
Tri-Watch
memory channels.
3.
A signal on any one (1) of the three (3) channels will
stop the scan for 10 seconds to allow you to listen
to the traffic on that location.
4.
Press
Channel
Up
or
Channel
Down
button to
resume scanning the
Tri-Watch
channels or to
change the scan direction.
5.
To EXIT the
Tri-Watch
scan, press the
TRI-WATCH
button again, and the radio will return to
GMRS
Standby
mode.
After the
Tri-Watch
scan stops to monitor a
channel, as long as you do not press any buttons
within 10 seconds, your radio will automatically
resume scanning the
Tri-Watch
channels
MEM
ESC
TRI
WATCH
SCAN
V
O
LUME
CALL
MODE
CHANNEL
H-M-L
Tri-Watch Button
MEM
ESC
TRI
WATCH
SCAN
V
O
LUME
CALL
MODE
CHANNEL
H-M-L
Channel Button
MEM
ESC
TRI
WATCH
SCAN
V
O
LUME
CALL
MODE
CHANNEL
H-M-L
Tri-Watch Button
CXT1095_FLT_MANL.indd 18-19
12/20/13 2:41 PM
