Cobra CX50 2014 5R King, Owner'S Manual

Page: 12 / 79

10
Replacing Transmission / Clutch Lubricant
Tools needed:

5mm allen wrench

Minimum of 235 ml (8 oz) Cobra Venom 3 Shoe Clutch Milk (Part #MCMUGF32).
Procedure:
1. Begin this procedure with a bike that has been ridden more than 5 minutes but less
than 10 minutes. It is desired to have the engine warm enough so that the oil is
‘runny’ but not so hot that there is risk of being burned by the engine or the oil.
Hot oil and hot components on the motorcycle may cause burns.
2. Remove the oil drain plug located on the right side of the engine, on the clutch
cover, near the brake lever (figure 1).
Figure 1
3. After it has drained, reinstall the plug, being sure that the gasket is in place.
4. Reapply oil from oil fill plug 235 cc (8.0 oz)
Cobra Venom 3 Shoe Clutch Milk thru
the oil fill plug.
NOTE: Putting additional oil, up to 350 ml (12 oz), can help clutch life. More than 350
ml (12 oz) will degrade engine performance.
NOTE:
It can be helpful to lean the bike over on its left side to add oil to the bike.
5. Reapply the oil fill plug, hand tight, being sure the gasket is in place.
CAUTION:
Cobra has spent considerable time and money developing the proper lubrication to
handle the harsh environment of the automatic clutch and transmission of this
motorcycle. C
obra’s specially developed
Cobra Venom 3 Shoe Clutch Milk (Part
#MCMUGF32) was formulated to provide superior lubrication and cooling capability
over extended periods of time and is the recommended lubricant for your Cobra
motorcycle.