background image

15

Nothing 

Comes Close to a Cobra

14

Turning Your Inverter On or Off

Be sure to have your power inverter properly installed
before attempting to turn the unit on (see installation
page 6).

To turn the power inverter on:

1. If a DC power supply is being used as the power

source, switch it on.

2. On the Output End, press the Power Button to on.

The inverter is now ready to deliver AC power to your loads.
If several loads are to be operated by the inverter, turn 
them on separately, after the inverter has been turned on.
This will ensure that the inverter does not have to deliver
the starting currents required for all the loads at once.

NOTE The Power Button turns the control circuit 
in the inverter on and off. It does not disconnect
power from the inverter.

When the button is in the off position, the inverter 
draws no current from the battery. When it’s in the
on position, but no power is being supplied to a
load, the inverter draws less than 600 milliamperes
from the battery. This is low current draw. It would
take more than a week to discharge a 100 ampere-
hour battery at this rate depending on the age of
the battery. 

Remote On/Off Switch 

An optional Remote On/Off Switch (see page 24 to order
accessories) can be connected to the Remote Jack
allowing you to turn the Cobra power inverter on or off
from a convenient location when the inverter is installed 
in an out of reach location.

Power On and Off

Intro

Operation

Customer
Assistance

Warranty

Notes

Notice

Main Icons

Secondary Icons

Caution

Warning

Installation

Operation

Remote On/Off Switch

Intro

Operation

Customer
Assistance

Warranty

Notes

Notice

Main Icons

Secondary Icons

Caution

Warning

Installation

Operation

Power Button

Remote Switch

Remote Jack

Intro

Operation

Customer
Assistance

Warranty

Notes

Notice

Main Icons

Secondary Icons

Caution

Warning

Installation

Intro

Operation

Customer
Assistance

Warranty

Notes

Notice

Main Icons

Secondary Icons

Caution

Warning

Installation

Intro

Operation

Customer
Assistance

Warranty

Notes

Notice

Main Icons

Secondary Icons

Caution

Warning

Installation

10275_CPI1575_PH3  8/14/07  8:38 AM  Page 14

Summary of Contents for CPI 1575
















Reviews: