![background image](http://html.mh-extra.com/html/cobra/cobra-micro-talk-2/cobra-micro-talk-2_operating-instructions-manual_2631074004.webp)
Pull
lock tab down
and lift door up
(towards you) to
remove battery
cover.
Insert
four “AAA”
batteries. Position
batteries according
to po l a ri ty marki n g s.
Remove
belt clip by (A.) pulling tab out and
(B.)
Sliding
belt clip up and off unit .
Operation
3
Operation
2
Note
Batteries not included with
MicroTalk 2 2-way radio.
Note
Always use high quality
alkaline or NiMH batteries.
Incorrect positioning can
damage both the batteries
and the unit.
Only the Cobra NiMH
battery (Part # FA-BP)
pack can be recharged.
See Accessories on page 37.
Charge ports for recharging
NiMH (Nickel Metal Hydride)
battery pack are located on
back of unit.
Note
When batteries are low or
need charging the
BATT LOW indicator will
blink. Replace alkaline
batteries or recharge NiMH
battery pack.
Install Batteries
Battery
Installation
Clear
antenna.
1
2
3
4
A.
B.
FRS250 manual.final.qx 10/1/98 2:43 PM Page 8