�
�
�
�
� � �
�
�
�
��
����������������
���������������
������
�
�
�
�
� � �
�
�
�
��
�
�
�
�
� � �
�
�
�
��
������
�����
�������
����
�����
���
�������
3
10
ASSEMBLY —
The detector is shipped fully assembled in one carton. Only two
adjustments are necessary, and no tools are required.
1.
Turn the search coil to the scanning position. It may be nec-
essary to loosen the knobs securing the coil and then tighten them
again. Make sure that the knobs are tightened (by hand) securely
after the search coil is positioned.
2.
Install (6) "AA" batteries and then the detector will be ready
for use.
MIND YOUR MANNERS
Filling holes and obeying
NO TRESPASSING
Signs are but 2 require-
ments of a dedicated metal detector hobbyist.
A sincere request that
KELLYCO makes to every user of a detector is that each place searched
be left in a better condition that it was found. Thousands of individuals and
organizations have adopted this formal.
Metal Detector Operators Code of Ethics:
• I will respect private and public property, all historical and archaeological
sites and will do no metal detecting on these lands without proper permis-
sion.
• I will keep informed on and obey all laws, regulations and rules governing
federal, state and local public lands.
• I will aid law enforcement officials whenever possible.
• I will cause no willful damage to property of any kind, including fences,
signs and buildings and will always fill holes I dig.
• I will not destroy property, buildings or the remains of ghost towns or other
deserted structures.
• I will not leave litter or uncovered items lying around. I will carry all trash
and dug targets with me when I leave each search area.
• I will observe the golden rule, using good outdoor manners and conduct-
ing myself at all times in a manner which will add to the stature and public
image of all people engages in the field of metal detection.
Warning!
Any metal detector may detect underground power lines, explosives or
other items which when struck could cause personal injury. When search-
ing for treasure with your detector, observe these precautions:
Do not hunt in an area where you believe there may be shallowly buried
underground electric lines or pipes.
Do not hunt in a military zone where bombs or other explosives may be
buried.
Avoid striking any line known to be or suspected to be carrying electrical
power.
Do not disturb any pipeline, particularly if it could be carrying flammable
gas or liquid.
Use reasonable caution in digging toward any target, particularly in areas
where you are uncertain of underground conditions.
CONTROL PANEL —
TRASH ELIMINATOR
DETECTION
DEPTH
INCREASE
OR
DECREASE
POWER
ON/OFF
BATTERY
TEST
INSERT ROD
TO JOIN TOGETHER
COIL KNOBS
VOLUME
CONTROL
TARGET
LIGHT
• FACTORY RECOMMEND
STARTING POINT
(Pre-Set Position)
• FACTORY
RECOMMEND
STARTING
POINT
(Pre-Set
Position)
• FACTORY
RECOMMEND
STARTING
POINT
(Pre-Set
Position)
