14
4. Remote Control
When the alarm (Cobra) remote control battery is low the remote LED flashes erratically or
slowly when any button is pressed.
Note:
-
If the remote battery is flat the system can be disarmed by entering your pin code using
the override LED button
(see chapter 1, PIN code).
4.1. Battery replacement
To replace the Cobra remote control battery, proceed as follows:
1.
Open the remote control at the position marked ‘Open’
using a small screwdriver.
2.
Carefully remove the battery.
3.
Wait
10 seconds before installing the new battery
.
4.
Close up the remote control.
5.
Stand next to vehicle and press remote ‘Lock’ button to synchronize the remote.
6.
Check alarm operation - press ‘Lock’ to arm & ‘Unlock’ to disarm.
Note:
Battery type: CR2032 (3v)
- Only touch the battery side edges
- Battery positive (
+
) side facing upwards
