9
2.7. Alarm status light (LED)
The status LED is used to provide information to the user during normal operation and as
well as a diagnostic tool.
Condition
Alarm status light (LED)
Disarm state
LED Off
Pre-arm state (30 sec arming time)
LED On
Armed state
LED flashes (at a steady rate)
Alarm state
LED flashes (at a steady rate)
Programming mode
LED On when entering the mode (after
flashes)
After an alarm
Number of flashes gives feedback from alarm
trigger
(see chapter 3.6. Alarm memory)
2.8. Battery back-up siren
The alarm system is specified with a rechargeable battery back-up siren. The siren battery
is fully recharged after approximately 12 hours of driving.