12
13
FCC & INDUSTRY CANADA STATEMENT
continued
Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouil-
lage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
NOTE:
The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifications or
changes to this equipment. Such modifications or changes
could void the user’s authority to operate the equipment.
This equipment is a portable device. The output power of
this device is less than 20mW. The SAR test is not required.
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harm-
ful interference in a residential installation. This equip-
ment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
FCC & INDUSTRY CANADA STATEMENT
For Products Purchased in USA:
NOTE:
This device complies with part 15 of FCC rules:
Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) This device must
accept any interference received including
interference that may cause undesired operation.
CAUTION:
Modifications or parts not approved by
Cobra Electronics Corporation may violate FCC Rules
and void authority to operate this equipment.
For Products Purchased in Canada:
This device complies with Industry Canada license-
exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause
interference, and (2) this device must accept any inter-
ference, including interference that may cause undesired
operation of the device.
This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled environ-
ment. This device complies with Part 15 of the FCC
Rules and with RSS-210 of Industry Canada. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device
must accept any interference received, including inter-
ference that may cause undesired operation.
CWABT320_MANL.indd 12-13
9/18/13 12:17 PM
