4
5
OPERATION
Turning the Cobra Airwave
™
360 On or Off
The ON/OFF switch is located on the bottom of the
Cobra Airwave
™
360.
Pairing the Cobra Airwave
™
360 with a smartphone
or any
Bluetooth
®
enabled music device
To use the Cobra Airwave
™
360 with any
Bluetooth
®
enabled smartphone or media device, you must first pair
the device to the Cobra Airwave
™
360. Once they have
been paired for the first time, the phone or media device
will automatically re-connect to the Cobra Airwave
™
360
when the power is turned to the ON position and
Bluetooth
®
is enabled on your device. For additional
information, see the operation manual for your smartphone
or media device.
Connecting with smartphone
1. Turn
Bluetooth
®
on in your settings menu. It will begin
searching for any
Bluetooth
®
device within range.
2. Make sure the Cobra Airwave
™
360 is turned to the
ON position, then press and hold the Dial Control
for 3 seconds until a double-beep sounds and the
LED flashes orange and blue.
3. You will see the Cobra Airwave
™
360 on the devices
list on your phone. Touch the
Cobra Airwave 360
to
pair. A single beep will sound and "
Connected"
will
appear in the device's screen.
DIAL CONTROL INTERFACE
Top view
Bottom view
Volume Up
or Down
Smartphone Voice
Command access
Music track
Prev/Next
buttons
LED status indicator
Microphone
Power ON/OFF switch
Front view
Rear view
Micro USB jack
Audio Out
(3.5mm Stereo)
Play
Phone
Stop
Gesture sensor
Gesture sensor
CWABT320_MANL.indd 4-5
9/18/13 12:17 PM
