background image

Passive Immobilisation

Additional/Replacement

Radio Keys

Arming the System

The System will automatically arm the

double immobilisation 60 seconds after

the ignition is switched OFF and the

driver's door is opened. If the doors are

not opened the delay is extended to 255

seconds after the ignition is switched OFF.

l

The LED will flash.

It will not now be possible to start the

engine, but in this instance the doors will

not lock and the windows etc. will not

close. The door trigger circuits and interior

sensor do not arm.

DRIVING THE VEHICLE

To start the engine, ensure the ignition is

switched OFF then disarm the immobiliser

by pressing button ‘A’ on the radio key and

then switch ON the engine within 255

seconds.
To fully arm the system after passive

immobilisation, switch OFF the passive

arming by pressing button ‘A’ on the radio

key, then re-arm the system (as described

in ‘Arming the System’).

The emergency override touch key can be

used to disarm/de-immobilise your Cobra

8185 Alarm System in the event of lost or

damaged radio keys.  If your car is locked

use your door key to enter the car and

touch the Emergency Override Touch Key

on the contacts of the touch receptacle -

this will disarm and de-immobilise the

security system.  If the system was fully

‘armed' the siren will sound until

disarming has taken place.  The car can

then be started in the normal way.

l

Up to four Emergency Override Touch

Keys can be programmed into each

Cobra 8185 Alarm System.

The radio keys for your Cobra 8185 Alarm

System have a ‘protected self-learning'

feature which allows up to

 four 

Radio Keys

to be programmed into your system by

using its unique PIN code in conjunction

with the electronic touch keys.
All existing radio keys and touch keys

must be re-programmed at the same time

as any additional or replacement keys are

being introduced to the system.  Your

Cobra Dealer will be able to carry out this

procedure for you.

Radio Key - pressing the operating button

‘A' will arm the system, indicated by:-
1. Two flashes of the vehicle's hazard

lights.

2. Continuous flashing of the LED

warning light.

3. Simultaneous locking of all doors.

l

Immediately the alarm unit is switched

ON (‘armed') the vehicle is

immobilised.

After switching ON (‘armed') a period of

approximately 45 seconds will elapse

before the system is fully active.  (This is a

‘setting-up' and ‘test period').
When the alarm is fully active it will be

triggered by:-
1. Opening a door, boot or bonnet (Direct

Contact Switches).

2. Movement within the vehicle

(Ultrasonic or optional Microwave).

3. Turning on ignition.
When triggered the Electronic Siren will

sound at 118dB and the hazard lights will

flash for 30 seconds - at the end of this

Emergency Override

Touch Key

3

Reviews: