ONE TOUCH CHANNEL 9 & 19
Instant access to emergency channel 9
or information channel 19.
Example: You are on channel 40 and wish
to check channel 9 & 19.
To switch to channel 9, push once.
To switch to channel 19, push twice.
To return to original channel, push three times.
**Note: At anytime you can change channels by
pressing the channel selector key.
DUAL WATCH
Dual Watch allows simultaneous monitoring of
any two preselected channels.
Example: You want to monitor channel 11 and
17 for incoming transmissions.
Set your squelch to the Desired Squelch Setting
(DSS). (See pp 9)
Select channel 11, and push and hold the
DW key until a “beep” is heard. The DW icon
will flash.
Select channel 17, and push and hold the DW
key until a “beep” is heard. The DW icon will
stay on and the 45WX will switch between
channels 11 and 17.
The 45WX will stop scanning and monitor a channel when it receives an
incoming transmission.
Five seconds after the transmission stops, the 45WX will continue to
switch between Channels.
**Note: At a later date, you can recall your preset DW channels by pushing
and releasing the DW key.
M.
LCD DISPLAY
All the information you need is provided from this LCD display panel.
TRANSMIT / RECEIVE
To transmit, push the PTT button.
The TX will be displayed during transmissions.
Hold the 45WX mic about 2 inches from your mouth.
Speak into the microphone in a normal voice.
Release the PTT button to receive incoming
transmissions.
**Note: While the PTT button is depressed, you cannot receive
transmissions. The RX icon is displayed when the radio is in
receive mode.
11
10
OPERATION
ONE TOUCH 9 & 15/DUAL WATCH
OPERATION
SELECT CHANNEL/DISPLAY/TRANSMIT
SELECTING A CHANNEL
Turn on your 45WX, push the UP arrow.
To select a higher channel, push the UP
arrow key.
To select a lower channel, push the DOWN
arrow key.
**Note: To quick advance channels, press and
hold the selection key.
2 digit channel display / 5
digit frequency display
F = Function Key indicator
AM = Amplitude Modulation
WX = Weather station
TX = Transmit indicator
RX = Receive indicator
LOW = Low power setting
M = Memory indicator
Memory channel number
Scan = Scan indicator
DW = Dual Watch indicator
EMG = Emergency channel 9
SAVE = Auto Battery
Save feature indicator
LOCK = Lock key indicator
BATT = Battery low indicator
M.
45WX.MANUAL.9/97.qx 9/26/97 2:38 PM Page 11
