12
NOTE:
You may need to adjust the brake pedal (up or down) to gain access to
the drain bolt.
4. After it has drained, reinstall the drain screw with gasket.
5. Refill oil from oil fill plug 250 ml (8.5oz)
Cobra Venom 3 Shoe Clutch Milk
(Part # MCMUGF01), or Dexron III Automatic Transmission Fluid, thru the fill
plug.
NOTE:
Leaning the bike over onto it’s left hand side will facilitate the oil filling
procedure.
6. Reapply the oil fill screw, securely, being sure the gasket is in place.
CAUTION:
Cobra has spent considerable time and money developing the proper lubrication
to handle the harsh environment of the automatic clutch and transmission of this
motorcycle. Cobra was forced to put forth this effort because the other available
options and not adequate. Cobra’s specially developed
Cobra Venom 3 Shoe
Clutch Milk
(Part # MCMUGF01) is the recommended lubricant for your PW3
motorcycle.
M2: Chain adjustment
Tools required for chain adjustment
•
Two 19 mm wrenches or sockets
•
13 mm wrench or socket
1. Make sure that the rear
wheel is aligned
properly.
2.
For proper adjustment,
the chain should have 35
mm (1 3/8”) free
movement just behind
the chain block with no
load on the bike (figure
2)
Figure 2
CAUTION:
Verify that the chain has a minimum of 6mm (1/4”) free movement when the
suspension is collapsed.