1.
After moving the MDU
to its detect position,
press the power button
on the RDU to turn the
system ON.
Nothing
Comes Close to a Cobra
®
17
16 English
Controls and Display
The RDU link
indicator shows the
MDU is connected to
the RDU by the
wireless link.
The indicator
changes to show
a lost connection.
The IntelliMute (I-Mute)
or IntelliMute Pro
(I-Mute Pro) symbol
shows only if the
feature is activated.
Arrow changes to
indicate if above or
below Set-point when
I-Mute or I-Mute Pro
is turned on. (Refer to
page 24.)
RDU Display
Standby Screen
When arrow is
displayed, you can
go to the next Standby
screens by pushing
MUTE/
button.
RDU battery icon displays
charge condition of RDU
battery.
Sections change to display
battery level, or if the
battery is being charged.
City/Highway symbol
changes to indicate
activated alert filtering
mode.
GPS icon indicates
GPS satellite lock.
Icon changes to
indicate lost signal
condition.*
Compass indicator uses GPS
Locator to indicate direction
of travel.*
*Note:
The GPS icon, Compass and other GPS features only display
if GPS Locator module is connected (optional for XRS R8, standard
on XRS R10G).
Your Detector
Getting Started
Power On/Off
•
2.
Unit cycles through power
On/self test, then shows
RDU battery status, any
alert settings changed from
factory defaults, wireless
connection status and GPS
signal status. Finally, the
Standby screen is displayed.
3.
Display changes to Auto
Dark operating screen after
30 seconds (factory
default).
4.
Press, hold power button
on RDU for more than two
seconds to turn Off the
system. The MDU can be
turned On/Off and will
operate without the RDU.
Your Detector
Lift battery and press here
NOTE
If, for any reason,
the RDU buttons stop
responding, open the
battery compartment and
press the
Reset Button
.
