Voice/Tone Setting
You can set your detector to sound alerts with either a
Voice
or a
Tone
. You
can change settings by using the
Mute
button. In Voice Alert mode, you will
first hear several tones, then a voice message announcing the type of signal
detected, followed by more tones. In Tone Alert mode, you will hear the tones
only. The factory setting
To Turn VG-2 and Spectre I & IV+ Alerts On and Off
While no signal
is being detected,
press and hold the
Dim
button for
four seconds.
Tone
Voice
Visual Display
On = Two Beeps
Spectre VG-2 On
V
will blink twice
in the display
Your Detector
Nothing
Comes Close to a Cobra
®
13
To Change From Voice Alert to Tone Alert
While no signal
is being detected,
press and hold
the
Mute
button
for two seconds.
Tone
Voice
Visual Display
One beep
Tone Alert
None
To Change From Tone Alert Back to Voice Alert
While no signal
is being detected,
press and hold the
Mute
button for
two seconds again.
Tone
Voice
Visual Display
None
Voice Alert
None
Spectre VG-2 Off
V
will blink once
in the display
Off = One Beep
VG-2 and Spectre I & IV+ Alert Settings
Police use radar detector detectors (RDDs) to spot users of radar detectors.
Your detector is able to identify signals from
VG-2
,
Spectre I
and
Spectre IV+
RDDs and can provide alerts when any of these or similar devices are in use
near your vehicle.
Your detector
can
be spotted by Spectre IV+ RDDs, but is invisible to VG-2
and Spectre I RDDs. You can choose whether you want to be alerted to VG-2
and Spectre I & IV+ RDD signals. The factory setting for VG-2 and Spectre I &
IV+ alerts is Off.
Settings
