Settings
Your Detector
12 English
IntelliMute Pro
IntelliMute Pro
prevents detection by radar detector detectors (RDDs) such as
VG-2, Spectre I and Spectre IV+ when traveling at slower speeds. It is intended
for use by experienced users only.
When IntelliMute Pro is turned On, and engine RPMs are below the IntelliMute
activation point, your detector’s radar detection circuits are turned Off to
prevent detection by RDDs.
Before IntelliMute Pro can be turned On, you must have turned On and Set the
IntelliMute activation point. (See pages 9 through 11.)
To Turn IntelliMute Pro On
While no signal
is being detected,
press and hold both
the
IntelliMute
and
City
buttons
for four seconds.
Tone
Voice
Visual Display
Two beeps
IntelliMute Pro On
c
or
h
will blink
To Turn IntelliMute Pro Off
Press and hold both
the
IntelliMute
and
City
buttons for
four seconds.
Tone
Voice
Visual Display
One beep
IntelliMute Pro Off
c
or
h
will show
steady
IntelliMute Pro On
X K Ka
V S
c
CAUTION
When IntelliMute Pro is On,
NO
radar signals will be detected and
NO
alerts will be given at RPMs
below
the IntelliMute activation point.
IntelliMute Button
City Button
Press and hold both
buttons simultaneously
