Settings
Your Detector
16 English
User Settings
•
IntelliShield City Mode Default
City Mode Default
makes three levels of
Audio Alert
suppression available
when you toggle from
Highway
to
City
mode. The factory setting is City X.
City X
sounds a single beep when an X band signal is first detected.
The alert then sounds when signal strength reaches level 3.
City X+K
combines the City X mode with prevention of K band audio
alerts until the signal strength reaches level 2.
City X Beep Off
blocks all X band audio alerts until the signal strength
reaches level 3.
The City Mode Default can be changed in Menu mode. It can also be changed
at any time the detector is in Standby mode:
1.
Press and hold the
City
button.
City X
will show on the screen.
2.
Release the
City
button and press again to advance to
City X+K
.
3.
Press
City
again to advance to
City X
Beep Off.
NOTE
Further presses of the
City
button will advance around the
loop of choices.
4.
Press
Menu/Save
button (or wait 15 seconds without pressing any
buttons) to save the current setting and return to Standby mode.
