9
Nothing
Comes Close to a Cobra
®
Wrist Strap and Belt Clip
Install/Remove Antenna
•
1.
To install the antenna turn the antenna into the radio
clockwise to tighten. Do not overtighten.
2.
To remove the antenna turn the antenna counterclockwise.
This radio transmitter IC: 906A-MRHH600 has been approved
by Industry Canada to operate with the supplied antenna. Other
antennas are strictly prohibited for use with this device.
Cet émetteur radio IC: 906A-MRHH600 a été approuvé par
Industrie Canada pour fonctionner avec l’antenne fournie.
D’autres antennes sont strictement interdits pour une utilisation
avec cet appareil.
Batteries and Charger
•
The radio is shipped with a sealed lithium-ion (LiON) battery pack
(P/N CM 110-034) that is rechargeable.
WARNING
The charger provided for this radio is only to be used
to charge the battery pack provided. Do not charge any
other type of batteries in the charger as fire, explosion
or battery damage may occur. Avoiding extreme
temperatures will also help prolong the life of the battery
pack for the radio. The device operating voltage is DC
6.29V - DC 8.40V.
When your rechargeable batteries begin to discharge too quickly,
it is time to install a new battery pack. Your radio
will also operate with five (5) high-quality AA alkaline batteries,
using the included alkaline battery tray.
Installing the Battery Pack
1.
Position the battery pack over the back of the radio.
2.
Engage the battery pack into the radio until battery pack is
fully seated into the radio housing.
3.
Tighten the screws using a coin or flat object to secure the
battery pack to the radio. Do not overtighten.
Belt Clip
Insert Belt Clip onto Radio
H M L
MOB
SQL
16+
MARINE HH600 DSC + GPS
WX
MENU
CALL
MORE
16
A
EMERGENCY
USA 6W
32 49.800N
SOG: 3.7 KTS
COG: 015 M
999.11.077W
DATE:06/30
TIME:10:00 LOC
Secure Radio
VHF Marine Radio Protocols
Installation
8
English
Install/Remove Antenna
VHF Marine Radio Protocols
Installation
Antenna
Wrist Strap and Belt Clip
•
Use the spring-loaded belt clip to carry the radio on your person.
1.
Slide the belt clip into the guide channel on the back of the
radio until it is locked in place.
2.
To attach the wrist strap, insert it through the hole at the top
of the belt clip, feed it through the looped end and pull tight to
secure to the belt clip.
3.
Press open the belt clip, slide it over the belt and release the
clip.
4.
To remove the belt clip from the radio press the tab on the belt
clip, which unlocks the clip, and slide it out.
Install Battery Pack
LiON Battery Pack
Tighten Screw
Wrist Strap Attachment
