VHF Marine Radio Protocols
Operating Your Radio
29
Nothing
Comes Close to a Cobra
®
Advanced Operation
Memory Location Mode
Your radio has unlimited memory locations for storing your
most frequently used channels. These memory locations can
be selected individually or can be scanned. (See page 32
under
Memory Location Scan
.)
To enter
Memory
mode, press
MEM/ESC
button. The display
will show the
MEM
icon and the
Memory Channel
bank will
be displayed on the matrix.
To Program Memory Locations:
1.
Press and hold the
MEM/ESC
button for two (2)
seconds. The memory location number will be
displayed on the matrix and the
MEM
icon will be
turned On.
2.
Use the
Channel Up/Down
button to advance to the
memory location (00-99) you want to program.
3.
Press the
MEM/ESC
button to select the memory
location.
4.
Use the
Channel Up/Down
button to change to the
channel you want to store into the selected memory
location.
5.
Press the
MEM/ESC
button to program that channel.
The memory location will be displayed on the matrix
again.
Repeat steps 2 through 5 to program as many
additional memories as you want.
6.
Press and hold the
MEM/ESC
button for two (2)
seconds. This will return the radio to
Memory
mode.
7.
Press and release the
MEM/ESC
button again to
return to
Marine Standby
mode.
VHF Marine Radio Protocols
Operating Your Radio
28 English
Advanced Operation
Using Tri-Watch
Tri-Watch Scan Mode:
1.
From
Marine Standby
mode, press the
TRI-WATCH
button. The
TW SCAN
will display on the matrix
along with the three marine channels stored in the
Tri-Watch
memory.
2.
The radio will scan through the three (3)
Tri-Watch
memory channels.
3.
A signal on any one (1) of the three (3) channels will
stop the scan for 10 seconds to allow you to listen to
the traffic on that location.
NOTE
After the
Tri-Watch
scan stops to monitor a channel,
as long as you do not press any buttons within 10
seconds, your radio will automatically resume
scanning the
Tri-Watch
channels.
4.
Press the
Channel Up/Down
button to resume
scanning the
Tri-Watch
channels or to change the
scan direction.
5.
To EXIT the
Tri-Watch
scan, press the
TRI-WATCH
button again. The
TRI
icon will disappear from the
LCD and the radio will return to
Marine Standby
mode.
CAN
H M L
ESC
MEM
ENT SETUP
C
MEM/ESC Button
MEM
SAME
ATIS VOX
LO
MEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
Memory Location Number
ENT SETUP
CALL
FLOATING MARINE HH350
Channel Up/Down Buttons
MEM
SAME
ATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
Channel Number
TW
EN
TRI-WATCH Button
MEM
SAME
ATIS VOX
LO
MEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
Tri-Watch Scan Mode
MRHH350W_FLT_MANL_ENG_MRHH330_ENG_Body 10/30/13 2:39 PM Page 28
