Cobi Rehab Cobi Cruise Power User Manual Download Page 8

 

 

 

| 04-2022 

User Manual Cobi Cruise 

 

  

 

 

 

The wheelchair neck support is an option. The 
wheelchair is supplied with a universal neck support 
bracket, allowing for the installation of different types 
of neck support. 

 

 

5.5 Neck support 

Cobi Cruise is equipped with t

wo 24” drive 

wheels. The drive wheels can be placed in five 
different positions (with tools).  

The two front positions are intended the active 
user, who thereby gets easier access to the 
wheels. The three rear positions are intended the 
passive user who is not expected to drive the 
wheelchair. 

5.6 Wheels 

A universal neck support bracket permits the 

installation of several types of neck supports. 

The two parking brakes are located on each side 
of the frame and can be operated by both user 
and caregivers.  

The disc brakes are operated by means of a brake 
lever mounted on the push bar. The brake lever 
can only be operated by the caregiver. 

5.9 Brakes 

The Cobi Cruise has three actuators. Two seat 
actuators and a back actuator. The two seat 
actuators control the tilt-in-space function. The 
seat actuators are installed under the seat.  

The back actuator controls the recline function. 
The back actuator is also installed under the seat. 

 

5.8 Actuators 

Two actuators (marked blue) control the tilt-in-space 

function. One actuator (red) controls the recline 

function. 

The control box is installed on the base plate. 
Dismantling the control box requires tools but 
should only be undertaken by Cobi Rehab service 
engineers.  

The electronics are IPX6-classified. This means 
that the wheelchair and its components can 

withstand high pressure and heavy sprays of 
water

.  

The electronics of the wheelchair does not disturb 
the operation of units in the surrounding 
environment which emit electromagnetic fields, 
e.g., alarm systems in shops, automated doors, 
etc.  

5.10 Control box 

Cobi Cruise is installed with anti-tip that can be 
adjusted to suit the terrain. Only remove the Anti-
tip when transporting the wheelchair without a 
user. 

 

Risk of tipping when anti-tip is removed.

 

5.7 Anti-tip 

Cobi Cruise is equipped with both hand brakes and 

disc brakes. 

Summary of Contents for Cobi Cruise Power

















Reviews: