Cobi Rehab Cobi Cruise Power User Manual Download Page 11

 

 

 

| 04-2022 

User Manual Cobi Cruise 

 

  

11 

 

 

 

 

 

 

 

 

 

Risk of crushing or getting caught

 

Be careful 

not to get the user’s tissue or fingers caught when adjusting the arm rests

. This also applies when using 

the swivelling function of the leg rests.

 

8. Possible adjustments 

When the user is placed in the wheelchair for the 
first time, the need for extra filling in the various 
back modules must be professionally assessed. If 
extra filling is needed, move the user out of the 
wheelchair, after which professionally trained staff 
adds or removes filling from the cushions in 
question.  

In addition, the tilt-in-space and recline function 
enables changes in position and optimises the 
conditions in connection with moving in and out 
of the chair.  

The seat depth can be adjusted in several ways, 
e.g., by using the FitGo system or by adjusting 
elements in the back cushion. In addition, the seat 
depth can also be adjusted. 

However, the latter adjustment requires a 
technician. Cobi Rehab recommend completing 
this before starting the specific adjustment. 

 Risk of fingers getting caught between the seat and 

the frame when tilting. 

 Risk of tissue getting caught between arm rest and 

back when reclining. 

8.1 Adjusting the back module 
 

Adjust leg rests to lower legs of the user. Adjust 
the angle of the foot plates in relation to the 
user's positioning of the feet. Adjust the calf 
support to provide the user with both support 
and relief of the calves. 

The angle of the arm rests can be height-adjusted 
and adjusted in a perpendicular position or in a 
downward-facing position, allowing the user to 
move close to a table. The arm rests can also be 
pulled back in connection with the application 
and/or removal of slings. 

The above adjustments are made by pulling out 
the button on the bracket at the front of the arm 
rest. 

The neck support bracket of the Cobi Cruise is 
universal. This allows for the installation of the 
most suitable neck support. 

 

8.2 Other possible adjustments 
 

Always measure the user when the user is seated. 

If help is needed in terms of measuring the user, 
please contact Cobi Rehab on telephone 
+45 7025 2522 or at [email protected]

8.3 Measuring the user 
 

Summary of Contents for Cobi Cruise Power

















Reviews: