| 10-2020 User manual X
XL-Rehab Rollator King
7
Adjusting the height of the handle
Remove the screw and the height-adjustment
knob from both handles to enable the handles to
move freely up and down.
2. Push the handle up or down until the required
height has been found. Reinsert the screw and
the knob again. Place the bolt on the back side,
so it fits in the hole.
3. Tighten.
Ensure left and right handles are level to avoid
instability problems.
How to fold the rollator
1. Grab the front of the seat (the side closest to
user) with one hand. Hold one of the handles
with the other hand.
2. Lift the seat.
3. The rollator now folds.
To minimize the size of an already folded
rollator, remove the back and basket
Adjustment of the brakes
The rollator can brake in two ways:
1. Brief stops:
Squeeze each brake handles upwards.
2.Longer stops:
Push both brake-handles downwards, so they
lock in a “down” position. The handles stay in
this position until they are actively released.
Brake inspection
The brakes are properly set on delivery.
Brake operation, and parking brake should be
checked before every use.
If the parking brake cannot lock or if the brakes
are not working correctly, contact Cobi Rehab
immediately.
Service the brakes every three months.
6. Adjustment
The Rollator King can be transported from one
place to another. Fold the rollator as described
above.
Rollator King cannot be used as a seat in a
motor vehicle.
Rollator King withstands being lifted in the frame,
handles or back rest, but not in the basket.
Contact Cobi Rehab for more information on
transportation or disassembly.
6.1 Transportation
The Rollator King should be stored in the dark
and covered with a sheet or other cover.
The Rollator King should be stored at
temperatures between -
10 °
-
50 ° C.
Check regularly that the rollator has not become
wet or damaged during storage.
6.2 Storage
