100-M0126X1A 04/09/10
21 of 23
www.cobham.com/gms
4.3.2.3
VMT Control and Status
Figure 30 - GUI Connected and Communicating with Remote VMT
The main display will provide the status of the VMT. The status bar at the bottom of the screen will
provide the temperature and battery voltage of the remote WCU.
The MODE command button toggles the encryption on or off on the VMT. The indicator next to the key
icon displays the current encryption status. A yellow indication means that encryption is on. A white
indication means that encryption is off.
The RF command button toggles the VMT power through off, low power, and high power. If the RF power
is off, the RF indicator and both sections of the indicator next to the antenna icon will be white. Low
power is indicated by the RF indicator being green along with the lower segment of the indicator next to
the antenna icon. High power is indicated by both segments being green.
The CONFIG command button increments the current VMT configuration as indicated by the group of 16
indicators above the button. A specific configuration can also be selected by clicking on the specific
configuration indicator. While the configuration is changing, the wait screen (Figure 31) is displayed.
Figure 31 - Change of Configuration Wait Screen
