100-M0126X1A 04/09/10
20 of 23
www.cobham.com/gms
Figure 27 - GUI Power Control Section
If the UWCM is able to communicate with the remote WCM, and the remote WCM responds that it was
able to activate the remote power switch, the wait screen (Figure 28) is displayed while the VMT initializes.
Figure 28 - Powering on Wait Screen
If communications could not be established between the local and remote units, the problem screen
(Figure 29) is displayed.
Figure 29 - Communications Error Screen
When communications is established, the connection indicator will turn green. If that indicator turns
yellow, it means that errors have been detected in the communications stream. The VMT Power Control
indicator will also turn green indicating that the remote power switch has been turned on.
