COBHAM Sea Tel Dual Antenna Arbitrator, Installation Manual

Page: 31 / 41

Specifications Dual Antenna Arbitrator (MXP)
9-1
9. Specifications
The technical specifications for the Dual Antenna Arbitrator are:
9.1. General
Physical Dimensions: Rackmount: 4.5 x 43.2 x 25.4 cm (1.75 x 17 x 10 inches)
Input Voltage: 88-264 VAC, 47-63 Hz, 1 phase
Power Requirements: 160 Watts maximum
Weight 2.8 kg (6.2 lbs)
9.2. Front Panel
Status Indicator Display: 4 LED enunciators for Ant A, Ant B, Manual and Auto
Ant A Button Select Ant A as Active Antenna (Manual Mode Only)
Ant B Button Select Ant B as Active Antenna (Manual Mode Only)
Manual Button Manual Mode
Auto Button Automatic Mode
Reset Button Resets the Arbitrator
Controls: AC Power On/Off
9.3. Rear Panel
The connectors available on the rear panel are:
9.3.1. AC POWER
Connection IEC receptacle with line filter.
9.3.2. Switch Plate - Standard Low Power
The standard switch plate, mounted in the rear panel, has the following connections:
9.3.2.1. LNB A - RX IF Input from Antenna A
SMA-Type, 50 Ohm, coax switch
Frequency Pass DC – 4.0 GHz:
Insertion Loss: 0.1dB Typical
Isolation: 80dB
Switching Time: 15 ms max
9.3.2.2. RX - RX IF Output to Modem
SMA-Type, 50 Ohm, coax switch
Frequency Pass DC – 4.0 GHz:
Insertion Loss: 0.1dB Typical
Isolation: 80dB
Switching Time: 15 ms max
9.3.2.3. LNB B - RX IF Input from Antenna B
SMA-Type, 50 Ohm, coax switch