Upgrade Procedure, xx09 MK2
Page 4 of 64
Document No
132622 Rev B
Form # 117140-B
1.
Using the cutters, cut the large
cable tie on the power cord
connector and disconnect the
power cord.
2.
Using the small flat blade
screwdriver, remove the PCU M&C
connector.
3.
Using the 5/16” (8mm) open end
wrench remove the two coax
cables.
4.
Remove the GPS (BNC) cable.
5.
Using the small flat blade
screwdriver, remove the motor
control connector.
6.
Remove the coax cables from the
switch assembly mounted on the
PCU. These coaxes will not be re-
used.
