COBHAM SAILOR 6560, User Manual

Page: 58 / 72

Chapter 3: Service & maintenance
48 Service and repair
To replace the fuse
One fuse (1 A) is installed in the GNSS/DGNSS Receiver.
If the fuse is blown, do as follows:
1. Track down why the fuse was blown and solve the problem, e.g.
incorrect polarity at the DC supply.
2. Power down the GNSS/DGNSS Receiver.
3. Remove the cover by loosening the 4 screws.
4. Take out the old fuse. Use the fuse puller.
5. Insert the new fuse. The fuse rating is 1 A.
To repack for shipment
Should you need to send the product for repair, please read the below
information before packing the product.
The shipping carton has been carefully designed to protect the
GNSS/DGNSS Receiver and its accessories during shipment. This carton and
its associated packing material should be used when repacking for
shipment. Attach a tag indicating the type of service required, return
address, part number and full serial number. Mark the carton FRAGILE to
ensure careful handling.
Figure 39: Location of the 1 A fuse