SOLH264TX Broadcast Transmitter
H264TX, H264ENGTX, H264ENC
UNCLASSIFIED
Part A - User Guide
DS000091
Rev 1.2 2013-05-02
UNCLASSIFIED
Page 7-42
7.3
Downconverter System
There are no downconverters used with transmitters.
7.4
Upconverter System
The Upconverter board is inside the enclosure of the transmitter and has no user serviceable
parts. There are no operational controls on the board.
7.5
Connecting Signals – SOLH264TX
7.5.1
Connecting Video Signals
For a composite or SDI input you’ll need a Video source, SOLH264TX and a CA0006 Video
cable assembly.
1.
Connect one BNC 2-way plug to the VIDEO/SDI jack of the SOLH264TX.
2.
Connect the other BNC 2-way plug to the video source.
3.
Switch on the Video source.
4.
Ensure the radio in configured to accept composite or SDI video.
For a HDMI input you’ll need a Video source, SOLH264TX and a HDMI cable suitable for the
video source with a Type A plug at the other end.
1.
Connect one HDMI Type A plug to the HDMI In socket of the SOLH264TX.
2.
Connect the other HDMI plug to the video source.
3.
Switch on the Video source.
4.
Ensure the radio is configured to accept HDMI video.
7.5.2
Connecting Audio Signals
For an analogue audio input you’ll need an Audio source, SOLH264TX and a CA0579 Audio
cable assembly.
1.
Connect the Lemo OB 5-way plug to the Audio jack of the SOLH264TX.
2.
Connect the XLR 2-way plugs to the audio source.
3.
Switch on the audio source.
4.
Ensure the radio is configured to send Analogue audio (Audio is set to Embedded
source by default).
SOLH264ENGTX Variant: This variant uses XLR connectors for audio input.
