SOLH264TX Broadcast Transmitter
H264TX, H264ENGTX, H264ENC
UNCLASSIFIED
Part A - User Guide
DS000091
Rev 1.2 2013-05-02
UNCLASSIFIED
Page 13-115
Step 4 – Configure the Receiver to show Transmitter 1
1.
Ensure all the modulation and video parameters are correctly set as in a conventional link
2.
To see Transmitter 1 set your Default Service to Transmitter1 or set your default
Program ID to 1. (Remember, Chain no 0 is Program Number 1).
Note: Remember the priority rule. If you only set a Service Name then the Program ID
might match the wrong program and take priority. A good rule of thumb is to always set
Program ID.
Step 5 – Configure the Receiver to show Transmitter 2
3.
Ensure all the modulation and video parameters are correctly set as in a conventional link
4.
To see Transmitter 2 set your Default Service to Transmitter2 or set your default
Program ID to 2. (Remember, Chain no 1 is Program Number 2).
Note: Remember the priority rule. If you only set a Service Name then the Program ID
might match the wrong program and take priority. A good rule of thumb is to always set
Program ID.
